Published TCIMAIL newest issue No.201
Maximum quantity allowed is 999
Please select the quantity
CAS RN: 36635-61-7 | Product Number: T1046
p-Toluenesulfonylmethyl Isocyanide
×
Purity: >98.0%(HPLC)(N)
Synonyms:
- TosMIC
- Tosylmethyl Isocyanide
Product Documents:
| Size | Unit Price | Belgium | Japan* | Quantity |
Shipping Information
|
|---|---|---|---|---|---|
| 5G |
€27.00
|
2 | 29 |
|
|
| 25G |
€93.00
|
5 | ≥100 |
|
* Stock available in Belgium: Shipment on the same day
* Stock available in Japan: Please check the Shipping Simulation for estimated shipments. (excludes regulated items and dry ice shipments)
| Product Number | T1046 |
Purity / Analysis Method 
|
>98.0%(HPLC)(N) |
| Molecular Formula / Molecular Weight | C__9H__9NO__2S = 195.24 |
| Physical State (20 deg.C) | Solid |
| Storage Temperature
|
Room Temperature (Recommended in a cool and dark place, <15°C) |
| Store Under Inert Gas | Store under inert gas |
| Condition to Avoid | Moisture Sensitive |
| CAS RN | 36635-61-7 |
| Reaxys Registry Number | 2331606 |
| PubChem Substance ID | 87576847 |
| SDBS (AIST Spectral DB) | 15758 |
| Merck Index (14) | 9556 |
| MDL Number | MFCD00000005 |
Specifications
| Appearance | White to Yellow to Orange powder to crystal |
| Purity(HPLC) | min. 98.0 area% |
| Purity(with Total Nitrogen) | min. 98.0 % |
Properties (reference)
| Melting Point | 110 °C |
GHS
| Pictogram |
|
| Signal Word | Danger |
| Hazard Statements | H301 + H311 + H331 : Toxic if swallowed, in contact with skin or if inhaled. H315 : Causes skin irritation. H319 : Causes serious eye irritation. |
| Precautionary Statements | P261 : Avoid breathing dust. P264 : Wash skin thoroughly after handling. P280 : Wear protective gloves/ protective clothing/ eye protection/ face protection/ hearing protection. P301 + P310 + P330 : IF SWALLOWED: Immediately call a POISON CENTER/doctor. Rinse mouth. P302 + P352 + P312 : IF ON SKIN: Wash with plenty of water. Call a POISON CENTER/doctor if you feel unwell. P403 + P233 : Store in a well-ventilated place. Keep container tightly closed. |
Related Laws:
| EC Number | 253-140-1 |
Transport Information:
| UN Number | UN2811 |
| Class | 6.1 |
| Packing Group | III |
| HS Number | 2930909531 |
Application
TCI Practical Example: Introduction of Cyano Group with Homologation Using TosMIC
-
Used Chemicals
-
- p-Toluenesulfonylmethyl Isocyanide (=TosMIC) [T1046]
- 2-Adamantanone [A0719]
- Potassium tert-Butoxide (= tBuOK) [P1008]
- 2,2-Dimethoxyethane (= DME)
- Ethanol (= EtOH)
-
Procedure
-
tBuOK (934 mg, 8.32 mmol, 2.5 eq.) was added to a solution of 2-adamantanone (500 mg, 3.33 mmol) and TosMIC (845 mg, 4.33 mmol, 1.3 eq.) in DME/EtOH (10.4 mL/0.8 mL), cooling with a water bath and the mixture was stirred for 30 minutes at room temperature. And then the reaction mixture was stirred for 4 hours at 40 °C. The reaction mixture was filtered and the insoluble was washed with DME. The filtrate was concentrated under reduced pressure to a volume of 2-3 mL, and the residue was charged with neutral alumina (10 g), eluted with a mixture of hexane:dichloromethane = 5:1 (60 mL) and concentrated under reduce pressure to give 2-cyanoadamantane as a white solid (441 mg, 82% yield).
-
Experimenter’s Comments
-
The reaction mixture was monitored by TLC (ethyl acetate:hexane = 1:10, Rf = 0.6).
-
Analytical Data
-
2-Cyanoadamantane
1H NMR (270 MHz, CDCl3); δ 2.90 (brs, 1H), 2.18-2.13 (m, 4H), 1.94-1.87 (m, 4H), 1.77-1.72 (m, 6H).
-
Lead Reference
-
- A Simple One-Step Synthesis of 2-Cyanoadamantane, a Precursor to Adamantane-2-Carboxylic Acid
-
Other Reference
-
- Discovery and Metabolic Stabilization of Potent and Selective 2-Amino-N-(adamant-2-yl) Acetamide 11β-Hydroxysteroid Dehydrogenase Type 1 Inhibitors
Application
Synthesis of Heterocyclic Compounds using TosMIC (Multicomponent Reactions)
Typical Procedure (Entry 3):
To a stirred solution of o-phenylenediamine (1.0 mmol) in toluene (20 mL), 4-chlorobenzaldehyde (1.0 mmol) is added and stirring is continued for 5 min. Then TosMIC (1.0 mmol) and DABCO (1.2 mmol) are added and the reaction mixture is heated to 80 °C for 4 h. The resulting solution is initially washed with 5% HCl, then with H2O and dried. The solvent is distilled off under reduced pressure to yield the corresponding crude product mixture, which is purified by silica gel chromatography (petroleum ether : EtOAc = 10 : 1) as eluent, to give the desired quinoxaline derivative in 84% yield as yellow crystals.
To a stirred solution of o-phenylenediamine (1.0 mmol) in toluene (20 mL), 4-chlorobenzaldehyde (1.0 mmol) is added and stirring is continued for 5 min. Then TosMIC (1.0 mmol) and DABCO (1.2 mmol) are added and the reaction mixture is heated to 80 °C for 4 h. The resulting solution is initially washed with 5% HCl, then with H2O and dried. The solvent is distilled off under reduced pressure to yield the corresponding crude product mixture, which is purified by silica gel chromatography (petroleum ether : EtOAc = 10 : 1) as eluent, to give the desired quinoxaline derivative in 84% yield as yellow crystals.
References
- Heterocyclizations via TosMIC-Based Multicomponent Reactions: A New Approach to One-Pot Facile Synthesis of Substituted Quinoxaline Derivatives.
PubMed Literature
Documents
Product Articles
[Product Highlights] p-Toluenesulfonylmethyl Isocyanide Derivatives Effective in the Construction of Heterocyclic Compounds[TCI Practical Example] Introduction of Cyano Group with Homologation Using TosMIC
Product Documents (Note: Some products will not have analytical charts available.)
Enter TCI Product Number
Enter KISHIDA Product Number
4-5 alphanumeric characters before the hyphen
7 alphanumeric characters
Safety Data Sheet (SDS)
Please select Language.
The requested SDS is not available.
Please Contact Us for more information.
• The requested SDS is not available.
Specifications
The requested specifications are not available.
Please Contact Us for more information.
The requested specifications are not available.
C of A & Other Certificates
Please enter Lot Number
Incorrect Lot Number. Please input only the 4-5 alphanumeric characters before the hyphen.
Incorrect Lot Number. Please input only the 7 alphanumeric characters.
• Please check that the lot number you have entered is correct. It is 4-5 alphanumeric characters before the hyphen. In particular, please check O (letter) or 0 (number) and I (letter) or 1 (number).
• If your information is correct and you are still not able to view the requested certificates, Please Contact Us for more information.
• Please check that the lot number you have entered is correct. It is 7 alphanumeric characters. In particular, please check O (letter) or 0 (number) and I (letter) or 1 (number).
Sample C of A
This is a sample C of A and may not represent a recently manufactured lot of the product.
A sample C of A for this product is not available at this time.
Analytical Charts
Please enter Lot Number
Incorrect Lot Number. Please input only the 4-5 alphanumeric characters before the hyphen.
Incorrect Lot Number. Please input only the 7 alphanumeric characters.
The requested analytical chart is not available. Sorry for the inconvenience.