text.skipToContent text.skipToNavigation

Maximum quantity allowed is 999

Please select the quantity

Featured Articles on Organic Transistor (OFET)

Articles about product introduction, device assessment and collaboration with academia and industry.

High-purity silane coupling agent: octadecyltrichlorosilane (>99.0%)

TCI has commercialized a quite high-pure “octadecyltrichlorosilane (ODTS) (> 99%) [T3815]”. We demonstrated a correlation between the purity of ODTS and the performance of OFET devices using an in-house system, and revealed that OFET devices with the high-pure ODTS (>99%) [T3815] exhibited higher carrier mobilities than those with the conventional ODTS (>85%) [O0079]

High-purity silane coupling agent: octadecyltrichlorosilane

An Example of OFET Evaluation: High performance n-type semiconductor materials "TU-1" and "TU-3"

We demonstrated the fabrication and evaluation of OFET devices by using “TU-1 [T3922]” and “TU-3 [T3924]”. Both devices showed high performance with electron carrier mobility (μ) of over 1.2 cm2/Vs.

An Example of OFET Evaluation: High performance n-type semiconductor materials "TU-1" and "TU-3"

Purification via sublimation and Comparison of FET performances: Pentacene [P2524]

We demonstrated the fabrication and evaluation of OFET devices by using high-purity "pentacene (99.999%) [P2524]" and other companies’ pentacene samples. P2524-based FET devices showed high performance with hole carrier mobilities of 0.39 cm2/Vs (bare substrate) and 1.52 cm2/Vs (OTS-treated substrate).

Purification via sublimation and Comparison of FET performances: Pentacene [P2524]

An Example of OFET Evaluation: p-type semiconductor material "Ph-BTBT-10"

We demonstrated the fabrication and evaluation of OFET devices by using “Ph-BTBT-10 [D5491]”. The device showed high performance with a hole carrier mobility of 14.0 cm2/Vs.

An example of OFET evaluation

An Example of OFET Evaluation: Polymer p-type Material “P3HT(regioregular)”

We demonstrated the fabrication and evaluation of OFET devices by using “P3HT (regioregular) [P2513]”. The device showed high performance with a hole transport mobility of 0.1 cm2/Vs.

An Example of OFET Evaluation: P-type material "pentacene"

We demonstrated the fabrication and evaluation of OFET devices by using “pentacene [P2524]” sublimed grade. The device showed high performance with a hole carrier mobility of 1.52 cm2/Vs.

An example of OFET evaluation

An Example of OFET Evaluation: P-type material "DPh-BTBT"

We demonstrated the fabrication and evaluation OFET devices by using the "DPh-BTBT [D3526]": high-mobility and air-stability p-type material. The device showed high performance with a hole carrier mobility of 3.0 cm2/Vs in the air.

An example of OFET evaluation