BCA Protein Assay Kit

×

New
Purity:

Synonyms:

• BCA Protein Quantitation Kit

Product Documents:

SDS | Specifications | C of A & Other Certificates | Analytical Charts

General Information | Specifications & Properties | Safety & Regulations | Applications & Literature

Supplemental Product Information

Explanatory notes for this page

Size	Unit Price	Belgium	Japan*	Quantity	Shipping Information
1KIT	€145.00	Contact Us	9		Shipping Simulation

* Stock available in Belgium: Shipment on the same day
* Stock available in Japan: Please check the Shipping Simulation for estimated shipments. (excludes regulated items and dry ice shipments)

Added to Your Shopping Cart

Add to cart

Request Bulk Quote

Product Information

• Components : BCA Reagent A: 250 mL, BCA Reagent B: 25 mL
• Size : 125 tests (Cuvette). 1250 tests (96-well plate).

Description

• The BCA protein assay is a highly sensitive colorimetric method used to quantify protein concentration. It utilizes the color reaction of bicinchoninic acid with copper ions, which themselves have been reduced by peptide bonds in proteins, allowing quantification via absorbance measurement at 562 nm. Its resistance to common interfering substances makes it suitable for use with most biological samples.

Storage

• Store at room temperature. Use within 1 year.

Note

• For Research Use Only. Not for Diagnostic or Therapeutic Use.

Compatible substance concentrations in protein sample

• See the pdf file in this link.

Protocol (96-well plate)

• 1. Mix Reagent A and Reagent B at a ratio of 50:1 to prepare a working solution.
  2. Dispense 25 µL of protein standards (e.g., a two-fold serially diluted BSA solution series starting at 2 mg/mL), blank (0 mg/mL), and samples into appropriate wells.
     Caution: Samples falling outside the calibration range must be measured again with appropriate dilutions.
  3. Add 200 µL of the working solution to each well and mix gently.
  4. Incubate at 37 °C for 30 minutes.
  5. After incubation, remove any bubbles by gently tapping or shaking the plate and measure the absorbance at 562 nm (acceptable range: 540-570 nm).
  6. Subtract the blank absorbance from all readings (blank correction).
  7. Plot the blank-corrected absorbance values of the standard curve against protein concentration to obtain a regression equation.
  8. Use this equation to calculate the protein concentration of each sample.

Protocol (Cuvette)

• 1. Mix Reagent A and Reagent B at a ratio of 50:1 to prepare a working solution.
  2. Dispense 2.0 mL of the working solution into each of an appropriate number of sample tubes.
  3. Add 100 µL of protein standards (e.g., a two-fold serially diluted BSA series starting at 2 mg/mL), blank (0 mg/mL), and samples to the respective tubes.
     Caution: Samples falling outside the calibration range must be measured again with appropriate dilutions.
  4. Mix by vortexing or pipetting until thoroughly combined.
  5. Incubate at 37 °C for 30 minutes.
  6. After incubation, ensure that no bubbles are present in the light path of the cuvette, and measure the absorbance at 562 nm.
  7. Subtract the blank absorbance from all readings (blank correction).
  8. Plot the blank-corrected absorbance values of the standard curve against protein concentration to obtain a regression equation.
  9. Use this equation to calculate the protein concentration of each sample.