text.skipToContent text.skipToNavigation

Maximum quantity allowed is 999

Please select the quantity

CAS RN: 32248-43-4 | Product Number: S0494

Samarium(II) Iodide (ca. 0.1mol/L in Tetrahydrofuran)


Purity:
Synonyms:
Documents:
25ML
¥6,200
Contact Us Contact Us Contact Us
100ML
¥18,600
Contact Us Contact Us Contact Us
Available Stock: Prompt shipment (for products) in Saitama/Hyogo warehouse. Stock in other WH: 2-3 Business Days
* Please contact us if you need further information.
* To send your quote request for bulk quantities, please click on the "Request Bulk Quote" button. Please note that we cannot offer bulk quantities for some products.
*TCI frequently reviews storage conditions to optimize them. Please note that the latest information on the storage temperature for the products is described on our website.

Product Number S0494
Molecular Formula / Molecular Weight SmI__2 = 404.17  
Physical State (20 deg.C) Liquid
Store Under Inert Gas Store under inert gas
Condition to Avoid Air Sensitive,Moisture Sensitive
CAS RN 32248-43-4
PubChem Substance ID 87558542
Merck Index (14) 8349
Specifications
Appearance Blue to Dark blue clear liquid to cloudy liquid
Concentration(Titration) 0.075 to 0.105 mol/L
Properties (reference)
Specific Gravity (20/20) 0.92
GHS
Pictogram Pictogram Pictogram Pictogram
Signal Word Danger
Hazard Statements H302 : Harmful if swallowed.
H315 : Causes skin irritation.
H319 : Causes serious eye irritation.
H371 : May cause damage to organs.
H372 : Causes damage to organs through prolonged or repeated exposure.
H351 : Suspected of causing cancer.
H335 : May cause respiratory irritation.
H225 : Highly flammable liquid and vapor.
Precautionary Statements P501 : Dispose of contents/ container to an approved waste disposal plant.
P260 : Do not breathe dust/ fume/ gas/ mist/ vapors/ spray.
P270 : Do not eat, drink or smoke when using this product.
P202 : Do not handle until all safety precautions have been read and understood.
P240 : Ground/bond container and receiving equipment.
P210 : Keep away from heat/sparks/open flames/hot surfaces. No smoking.
P233 : Keep container tightly closed.
P201 : Obtain special instructions before use.
P243 : Take precautionary measures against static discharge.
P241 : Use explosion-proof electrical/ ventilating/ lighting/ equipment.
P242 : Use only non-sparking tools.
P271 : Use only outdoors or in a well-ventilated area.
P264 : Wash skin thoroughly after handling.
P280 : Wear protective gloves/ protective clothing/ eye protection/ face protection.
P370 + P378 : In case of fire: Use dry sand, dry chemical or alcohol-resistant foam to extinguish.
P337 + P313 : If eye irritation persists: Get medical advice/ attention.
P305 + P351 + P338 : IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P311 : IF exposed or concerned: Call a POISON CENTER/doctor.
P362 + P364 : Take off contaminated clothing and wash it before reuse.
P303 + P361 + P353 : IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P332 + P313 : If skin irritation occurs: Get medical advice/ attention.
P301 + P312 + P330 : IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Rinse mouth.
P304 + P340 + P312 : IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell.
P403 + P233 : Store in a well-ventilated place. Keep container tightly closed.
P403 + P235 : Store in a well-ventilated place. Keep cool.
P405 : Store locked up.
Related Laws:
ISHL Organic Solvents Class 2
Fire Defense Law Group-4-1-II
Transport Information:
UN Number UN2056
Class 3
Packing Group II
Application
Tandem SmI2-induced beta-elimination / aldol-type reaction

Typical procedure: Nitrone 1 (50 mg) is co-evaporated with toluene (1 mL x 3) at 35 °C then is deoxygenated. To the solution of 1 in dry THF (0.5 mL), a 0.1 mol/L THF solution of SmI2 (2.0 mL) is added at -60 °C under argon. After disappearance of the typical blue color, cyclohexanecarboxaldehyde (25 micro L) is added and the temperature is raised to room temperature over 5 h. A saturated aqueous solution of Na2S2O3 (2 mL), a saturated aqueous solution of NaHCO3 (2 mL) and EtOAc (2 mL) are added. The aqueous phase is extracted with EtOAc (20 mL x 2), and the combined extracts are dried over MgSO4. Concentration gives a crude oil. Purification by silica gel chromatography (eluent: pentane/EtOAc=6/1 to 0/1 then EtOAc/MeOH=8/1) gives 3 (39 mg, 77%) as a pale yellow oil.

References


PubMed Literature


Articles/Brochures

Documents (Note: Some products will not have analytical charts available.)
Safety Data Sheet (SDS)
Please select Language.

The requested SDS is not available.

Please Contact Us for more information.

Specifications
C of A & Other Certificates
Please enter Lot Number Incorrect Lot Number is entered
Analytical Charts
Please enter Lot Number Incorrect Lot Number is entered

The requested analytical chart is not available. Sorry for the inconvenience.

Other Documents