text.skipToContent text.skipToNavigation

Maximum quantity allowed is 999

Please select the quantity

CAS RN: 7681-65-4 | Product Number: R0314

CuI (HPMC encapsulated)


New
Purity:
Synonyms:
  • Copper(I) Iodide (HPMC encapsulated)
  • Cuprous Iodide (HPMC encapsulated)
Product Documents:
10EACH
$55.00
12   0   Contact Us

* Please contact our distributors or TCI to order our products. The above prices do not include freight cost, customs, and other charges to the destination.
* The storage conditions are subject to change without notice.


Supplemental Product Information:

Contents (per one capsule)

  • CuI ca. 0.800 mmol

Uses of Reagent

  • Applicable to copper-catalyzed reactions due to a copper catalyst encapsulated in HPMC capsules

Soluble Solvents

  • Water, DMSO, DMF, 1,4-Dioxane (50°C), THF/Water mixture, 1,2-Dimethoxyethane/Water mixture

Related Product

  • C2163 Copper(I) Iodide

Product Number R0314
Molecular Formula / Molecular Weight CuI = 190.45 
Physical State (20 deg.C) Solid
Storage Temperature Room Temperature (Recommended in a cool and dark place, <15°C)
Store Under Inert Gas Store under inert gas
Condition to Avoid Hygroscopic
CAS RN 7681-65-4
Specifications
Appearance White to Almost white capsule
Functionality test (conversion ratio) min.90.0 %
Properties (reference)
GHS
Pictogram Pictogram Pictogram Pictogram Pictogram
Signal Word Danger
Hazard Statements H302 : Harmful if swallowed.
H315 : Causes skin irritation.
H318 : Causes serious eye damage.
H373 : May cause damage to organs through prolonged or repeated exposure.
H317 : May cause an allergic skin reaction.
H335 : May cause respiratory irritation.
H400 : Very toxic to aquatic life.
H411 : Toxic to aquatic life with long lasting effects.
Precautionary Statements P501 : Dispose of contents/ container to an approved waste disposal plant.
P273 : Avoid release to the environment.
P272 : Contaminated work clothing should not be allowed out of the workplace.
P260 : Do not breathe dust.
P270 : Do not eat, drink or smoke when using this product.
P271 : Use only outdoors or in a well-ventilated area.
P264 : Wash skin thoroughly after handling.
P280 : Wear protective gloves/ eye protection/ face protection.
P302 + P352 : IF ON SKIN: Wash with plenty of water.
P391 : Collect spillage.
P314 : Get medical advice/ attention if you feel unwell.
P362 + P364 : Take off contaminated clothing and wash it before reuse.
P333 + P313 : If skin irritation or rash occurs: Get medical advice/ attention.
P301 + P312 + P330 : IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Rinse mouth.
P304 + P340 + P312 : IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell.
P305 + P351 + P338 + P310 : IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor.
P403 + P233 : Store in a well-ventilated place. Keep container tightly closed.
P405 : Store locked up.
Related Laws:
Transport Information:
UN Number UN3077
Class 9
Packing Group III
H.S.code* 3822.19-000
*This code is applied to the products when TCI exports from Japan and not for import in your country.
Application
TCI Practical Example: Goldberg Amination Using Capsule Reagents

TCI Practical Example: Goldberg Amination Using Capsule Reagents

Used Chemicals

Procedure

Copper(I) iodide (HPMC encapsulated) (one capsule) and 1,10-phenanthroline (HPMC encapsulated) (one capsule) were added to a solution of indole (93.7 mg, 800 µmol), 2-bromopyridine (164 mg, 1.04 mmol, 1.3 eq.) and cesium carbonate (521 mg, 1.60 mmol, 2.0 eq.) in DMSO (2.5 mL) at r.t. and the reaction mixture was stirred at 150 °C for 2 hours. After cooling to r.t., the solution was diluted with ethyl acetate (15 mL) and sat. Na2SO4 aq. (15 mL), and filtered through Celite pad and the filtrate was extracted with ethyl acetate (15 mL x 2). The organic layer was washed with 2 mol/L HCl (15 mL) and sat. NaHCO3 aq. (15 mL), dried over sodium sulfate and concentrated under reduced pressure. The crude product was purified by silica gel column chromatography (ethyl acetate:hexane = 10:1 - 5:1) to afford N-(2-pyridyl)indole (130 mg, 84% yield) as a pale-yellow oil.

Experimenter’s Comments

The reaction mixture was monitored by UPLC.
The material of the capsule is water-soluble HPMC (hydroxypropyl methylcellulose).
The capsule has the shape shown in Figure 1 and 1,10-phenanthroline (ca. 200 μmol) and copper(I) iodide (ca. 800 μmol) are encapsulated in each capsule, respectively.

Appearance of capsule
Figure 1. Appearance of capsule

The capsules dissolves in water or polar solvents as shown in Figure 2.
Capsule disintegrating
Figure 2. Capsule disintegrating
(left) Just after the capsule is put in, (right) 15 minutes after the capsule is put in

Analytical Data

N-(2-Pyridyl)-indole

1H NMR (400 MHz, CDCl3); δ 8.21 (d, 1H, J = 8.0 Hz), 7.85-7.81 (m, 1H), 7.37 (d, 1H, J = 4.0 Hz), 7.67 (d, 1H, J = 8.0 Hz), 7.51 (d, 1H, J = 8.0 Hz), 7.30(t, 1H, J = 8.0 Hz), 7.23-7.16 (m, 2H).

Lead Reference

Other References


Product Documents (Note: Some products will not have analytical charts available.)
Safety Data Sheet (SDS)
Please select Language.

The requested SDS is not available.

Please Contact Us for more information.

Specifications
C of A & Other Certificates
Please enter Lot Number Incorrect Lot Number. Please input only the 4-5 alphanumeric characters before the hyphen.

The product with the lot number searched for has been discontinued and related documentation is no longer provided. Please try a different lot number for this product.

Sample C of A
This is a sample C of A and may not represent a recently manufactured lot of the product.

A sample C of A for this product is not available at this time.

Analytical Charts
Please enter Lot Number Incorrect Lot Number. Please input only the 4-5 alphanumeric characters before the hyphen.

The requested analytical chart is not available. Sorry for the inconvenience.

The product with the lot number searched for has been discontinued and related documentation is no longer provided. Please try a different lot number for this product.

Other Documents

Session Status
Your session will timeout in 10 minutes. You will be redirected to the HOME page after session timeout. Please click the button to continue session from the same page. minute. You will be redirected to the HOME page after session timeout. Please click the button to continue session from the same page.

Your session has timed out. You will be redirected to the HOME page.