text.skipToContent text.skipToNavigation

Maximum quantity allowed is 999

Gelieve het aantal te selecteren

CAS RN: 7681-65-4 | Producten #: R0314

CuI (HPMC encapsulated)

Chemical Structure of CuI  (HPMC encapsulated)

New
Zuiverheid:
Synoniemen
  • Copper(I) Iodide (HPMC encapsulated)
  • Cuprous Iodide (HPMC encapsulated)
Productdocumenten:
10EACH
€65.00
Neem contact met ons op 10  

*Voorraad beschikbaar in België: Verzending dezelfde dag
*Voorraad beschikbaar in Japan: Raadpleeg de verzendsimulatie voor geschatte levertijden. (met uitzondering van gereguleerde producten en zendingen met droogijs)


Aanvullende productinformatie:

Contents (per one capsule)

  • CuI ca. 0.800 mmol

Uses of Reagent

  • Applicable to copper-catalyzed reactions due to a copper catalyst encapsulated in HPMC capsules

Soluble Solvents

  • Water, DMSO, DMF, 1,4-Dioxane (50°C), THF/Water mixture, 1,2-Dimethoxyethane/Water mixture

Related Product

  • C2163 Copper(I) Iodide

Artikel # R0314
Moleculaire formule / molecuulgewicht CuI = 190.45 
Fysieke toestand (20 graden C) Solid
Opslag condities Room Temperature (Recommended in a cool and dark place, <15°C)
Opslaan onder inert gas Store under inert gas
Te vermijden condities Hygroscopic
CAS RN 7681-65-4
Specificatie
Appearance White to Almost white capsule
Functionality test (conversion ratio) min.90.0 %
eigenschappen
GHS
Pictogram Pictogram Pictogram Pictogram Pictogram
Signaalwoord Gevaar
Gevarenaanduidingen H302 : Schadelijk bij inslikken.
H315 : Veroorzaakt huidirritatie.
H318 : Veroorzaakt ernstig oogletsel.
H373 : Kan schade aan organen veroorzaken bij langdurige of herhaalde blootstelling.
H317 : Kan een allergische huidreactie veroorzaken.
H335 : Kan irritatie van de luchtwegen veroorzaken.
H410 : Zeer giftig voor in het water levende organismen, met langdurige gevolgen.
Voorzorgsmaatregelen P273 : Voorkom lozing in het milieu.
P260 : Stof niet inademen.
P264 : Na het werken met dit product de huid grondig wassen.
P280 : Beschermende handschoenen/ oogbescherming/ gelaatsbescherming dragen.
P391 : Gelekte/gemorste stof opruimen.
P305 + P351 + P338 + P310 : BIJ CONTACT MET DE OGEN: voorzichtig afspoelen met water gedurende een aantal minuten; contactlenzen verwijderen, indien mogelijk; blijven spoelen. Onmiddellijk een ANTIGIFCENTRUM/arts raadplegen.
Gerelateerde wetten:
Transport informatie:
UN-nummer UN3077
Klasse 9
Verpakkingsgroep (DOT-AIR) III
HS-NR (invoer / uitvoer) (TCI-E) 3822190090
Toepassing
TCI Practical Example: Goldberg Amination Using Capsule Reagents

TCI Practical Example: Goldberg Amination Using Capsule Reagents

Used Chemicals

Procedure

Copper(I) iodide (HPMC encapsulated) (one capsule) and 8-quinolinol (HPMC encapsulated) (one capsule) were added to a solution of indole (93.7 mg, 800 µmol), 2-bromopyridine (164 mg, 1.04 mmol, 1.3 eq.) and cesium carbonate (521 mg, 1.60 mmol, 2.0 eq.) in DMSO (2.5 mL) at room temperature and the reaction mixture was stirred at 150 °C for 4 hours. After cooling to room temperature, the solution was diluted with ethyl acetate (15 mL) and sat. Na2SO4 aq. (15 mL), and filtered through Celite pad. The filtrate was extracted with ethyl acetate (15 mL x 2) and the combined organic layer was washed with 2 mol/L HCl (15 mL) and sat. NaHCO3 aq. (15 mL), dried over sodium sulfate and concentrated under reduced pressure. The crude product was purified by silica gel column chromatography (ethyl acetate:hexane = 1:10 - 1:5) to afford N-(2-pyridyl)indole (97 mg, 62% yield) as a pale-yellow oil.

Experimenter’s Comments

The reaction mixture was monitored by UPLC.
The material of the capsule is water-soluble HPMC (hydroxypropyl methylcellulose).
The capsule has the shape shown in Fig. 1 and 8-quinolinol (ca. 450 μmol) and copper(I) iodide (ca. 800 μmol) are encapsulated in each capsule, respectively.

Appearance of capsule
Fig. 1. Appearance of the capsule
The capsule dissolves in water or polar solvent as shown in Fig. 2.
Appearance of capsule
Fig. 2. Capsule disintegrating
(left) Immediately after the addition of the capsule,
(right) 15 minutes after the addition of the capsule.

Analytical Data

N-(2-Pyridyl)indole

1H NMR (400 MHz, CDCl3); δ 8.21 (d, 1H, J = 8.0 Hz), 7.85-7.81 (m, 1H), 7.37 (d, J = 4.0 Hz, 1H), 7.67 (d, J = 8.0 Hz, 1H), 7.51 (d, J = 8.0 Hz, 1H), 7.30 (t, J = 8.0 Hz, 1H), 7.23-7.16 (m, 2H).

Lead Reference

Other Reference


Toepassing
TCI Practical Example: Goldberg Amination Using Capsule Reagents

TCI Practical Example: Goldberg Amination Using Capsule Reagents

Used Chemicals

Procedure

Copper(I) iodide (HPMC encapsulated) (one capsule) and 1,10-phenanthroline (HPMC encapsulated) (one capsule) were added to a solution of indole (93.7 mg, 800 µmol), 2-bromopyridine (164 mg, 1.04 mmol, 1.3 eq.) and cesium carbonate (521 mg, 1.60 mmol, 2.0 eq.) in DMSO (2.5 mL) at r.t. and the reaction mixture was stirred at 150 °C for 2 hours. After cooling to r.t., the solution was diluted with ethyl acetate (15 mL) and sat. Na2SO4 aq. (15 mL), and filtered through Celite pad and the filtrate was extracted with ethyl acetate (15 mL x 2). The organic layer was washed with 2 mol/L HCl (15 mL) and sat. NaHCO3 aq. (15 mL), dried over sodium sulfate and concentrated under reduced pressure. The crude product was purified by silica gel column chromatography (ethyl acetate:hexane = 10:1 - 5:1) to afford N-(2-pyridyl)indole (130 mg, 84% yield) as a pale-yellow oil.

Experimenter’s Comments

The reaction mixture was monitored by UPLC.
1,10-Phenanthroline (ca. 200 μmol) and copper(I) iodide (ca. 800 μmol) are encapsulated in each capsule, respectively.

Analytical Data

N-(2-Pyridyl)-indole

1H NMR (400 MHz, CDCl3); δ 8.21 (d, 1H, J = 8.0 Hz), 7.85-7.81 (m, 1H), 7.37 (d, 1H, J = 4.0 Hz), 7.67 (d, 1H, J = 8.0 Hz), 7.51 (d, 1H, J = 8.0 Hz), 7.30(t, 1H, J = 8.0 Hz), 7.23-7.16 (m, 2H).

Lead Reference

Other References


Productdocumenten (Opmerking: Voor sommige producten zijn geen analytische grafieken beschikbaar.)
Veiligheidsinformatie-blad (VIB)
Selecteer alstublieft taal.

Het gevraagde SDS is niet beschikbaar.

Neem contact met ons op voor meer informatie.

Specificatiedocument
Analyse certificaat & andere certificaten
Gelieve het lotnummer in te vullen aub Er is een onjuist lotummer ingevoerd. Voer alleen 4-5 alfanumerieke tekens vóór het koppelteken in.

Het gezochte lotnummer is niet meer beschikbaar en de bijbehorende documentatie is niet meer beschikbaar. Probeer een ander lotnummer voor dit product.

Voorbeeldanalysecertificaat
Dit is een voorbeeldanalysecertificaat en vertegenwoordigt mogelijk niet een recent geproduceerde partij van het product.

Een voorbeeldanalysecertificaat voor dit product is op dit moment niet beschikbaar.

Analytische grafieken
Gelieve het lotnummer in te vullen aub Er is een onjuist lotummer ingevoerd. Voer alleen 4-5 alfanumerieke tekens vóór het koppelteken in.

De gevraagde analytische grafiek is niet beschikbaar. Onze excuses voor het ongemak.

Het gezochte lotnummer is niet meer beschikbaar en de bijbehorende documentatie is niet meer beschikbaar. Probeer een ander lotnummer voor dit product.

Andere documenten

Sessiestatus
Uw sessie verloopt over 10 minuten. Na het verlopen van de sessie word u doorgestuurd naar de startpagina. Klik op de knop om de sessie vanaf dezelfde pagina voort te zetten. minuut. Na het verlopen van de sessie word u doorgestuurd naar de startpagina. Klik op de knop om de sessie vanaf dezelfde pagina voort te zetten.

Uw sessie is verlopen. U wordt doorgestuurd naar de startpagina.

Als u uw regio wijzigt, wordt uw sessie beëindigd. Wilt u doorgaan?