Maximum quantity allowed is 999
Please select the quantity
CAS RN: 563-41-7 | Product Number: S0032
Semicarbazide Hydrochloride
×
Purity: >99.0%(T)
Synonyms:
Product Documents:
| Size | Unit Price | Same Day | 2-3 Business Days | Other Lead Time |
Shipping Information
|
|---|---|---|---|---|---|
| 25G |
$19.00
|
14 | 7 | It can be shipped in about 2 weeks after ordering | |
| 500G |
$77.00
|
≥40 | ≥40 | It can be shipped in about 2 weeks after ordering |
* Please contact our distributors or
TCI
to order our products. The above prices do not include freight cost, customs, and other charges to the destination.
* The storage conditions are subject to change without notice.
| Product Number | S0032 |
Purity / Analysis Method 
|
>99.0%(T) |
| Molecular Formula / Molecular Weight | CH__5N__3O·HCl = 111.53 |
| Physical State (20 deg.C) | Solid |
| Storage Temperature
|
Room Temperature (Recommended in a cool and dark place, <15°C) |
| CAS RN | 563-41-7 |
| Reaxys Registry Number | 3593642 |
| PubChem Substance ID | 87575661 |
| Merck Index (14) | 8444 |
| MDL Number | MFCD00013009 |
Specifications
| Appearance | White to Almost white powder to crystal |
| Purity(Bromination Method) | min. 99.0 % |
Properties (reference)
| Solubility (slightly sol. in) | Alcohol |
| Solubility (insoluble in) | Ether |
GHS
| Pictogram |
|
| Signal Word | Danger |
| Hazard Statements | H301 : Toxic if swallowed. H315 : Causes skin irritation. H319 : Causes serious eye irritation. H361 : Suspected of damaging fertility or the unborn child. H373 : May cause damage to organs through prolonged or repeated exposure. |
| Precautionary Statements | P501 : Dispose of contents/ container to an approved waste disposal plant. P260 : Do not breathe dust. P270 : Do not eat, drink or smoke when using this product. P202 : Do not handle until all safety precautions have been read and understood. P201 : Obtain special instructions before use. P264 : Wash skin thoroughly after handling. P280 : Wear protective gloves/ protective clothing/ eye protection/ face protection. P302 + P352 : IF ON SKIN: Wash with plenty of water. P308 + P313 : IF exposed or concerned: Get medical advice/ attention. P337 + P313 : If eye irritation persists: Get medical advice/ attention. P305 + P351 + P338 : IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P362 + P364 : Take off contaminated clothing and wash it before reuse. P332 + P313 : If skin irritation occurs: Get medical advice/ attention. P301 + P310 + P330 : IF SWALLOWED: Immediately call a POISON CENTER/doctor. Rinse mouth. P405 : Store locked up. |
Related Laws:
| RTECS# | VT3500000 |
Transport Information:
| UN Number | UN2811 |
| Class | 6.1 |
| Packing Group | III |
| H.S.code* | 2928.00-000 |
Application
Synthesis of Alkynyl Ketones using Eschenmoser-Tanabe Fragmentation(alternative method)
Typical Procedure:
To a stirred solution of semicarbazide hydrochloride (12.94 g, 116.0 mmol) and sodium acetate trihydrate (0.95 g, 12 mmol) in water (116 mL) is added 1 (2.63 g, 11.6 mmol) at room temperature. Sufficient 95% ethanol is added to bring about a homogenous solution. After stirring at room temperature for 7 h, the reaction mixture is extracted with ethyl acetate. The combined organic phases are washed with brine, dried over anhydrous sodium sulfate, filtered and concentrated under reduced pressure. The crude product is purified by silica gel chromatography (ethyl acetate → ethyl acetate : methanol = 9 : 1) to give 2 (2.92 g, 89%) as a white solid.
Next, to a stirred solution of 2 (1.86 g, 6.57 mmol) in dichloromethane (65.7 mL) is added portionwise 95% lead tetraacetate (6.42 g, 13.8 mmol), maintaining the bath temperature at –10 °C After stirring for 1 h at –10 °C, ethyl acetate is added to the reaction mixture, which is allowed to warm to room temperature. Then the mixture is filtered through a Celite pad and concentrated under reduced pressure. The crude product is purified by silica gel column chromatography (hexane : ethyl acetate = 4 : 1) to give 3 (0.83 g, 60%) as a colorless oil.
To a stirred solution of semicarbazide hydrochloride (12.94 g, 116.0 mmol) and sodium acetate trihydrate (0.95 g, 12 mmol) in water (116 mL) is added 1 (2.63 g, 11.6 mmol) at room temperature. Sufficient 95% ethanol is added to bring about a homogenous solution. After stirring at room temperature for 7 h, the reaction mixture is extracted with ethyl acetate. The combined organic phases are washed with brine, dried over anhydrous sodium sulfate, filtered and concentrated under reduced pressure. The crude product is purified by silica gel chromatography (ethyl acetate → ethyl acetate : methanol = 9 : 1) to give 2 (2.92 g, 89%) as a white solid.
Next, to a stirred solution of 2 (1.86 g, 6.57 mmol) in dichloromethane (65.7 mL) is added portionwise 95% lead tetraacetate (6.42 g, 13.8 mmol), maintaining the bath temperature at –10 °C After stirring for 1 h at –10 °C, ethyl acetate is added to the reaction mixture, which is allowed to warm to room temperature. Then the mixture is filtered through a Celite pad and concentrated under reduced pressure. The crude product is purified by silica gel column chromatography (hexane : ethyl acetate = 4 : 1) to give 3 (0.83 g, 60%) as a colorless oil.
References
- 1)Thermolysis of Δ3-1 ,3,4-oxadiazolin-2-ones and 2-phenylimino-Δ3-l,3,4-oxadiazolinesderived from α,β-epoxyketones. An alternative method for the conversion of α,β-epoxyketones to alkynones and alkynals
- 2)Total Synthesis of (–)-Mersicarpine
PubMed Literature
Product Documents (Note: Some products will not have analytical charts available.)
Enter TCI Product Number
Enter KISHIDA Product Number
4-5 alphanumeric characters before the hyphen
7 alphanumeric characters
Safety Data Sheet (SDS)
Please select Language.
The requested SDS is not available.
Please Contact Us for more information.
• The requested SDS is not available.
Specifications
The requested specifications are not available.
Please Contact Us for more information.
The requested specifications are not available.
C of A & Other Certificates
Please enter Lot Number
Incorrect Lot Number. Please input only the 4-5 alphanumeric characters before the hyphen.
Incorrect Lot Number. Please input only the 7 alphanumeric characters.
• Please check that the lot number you have entered is correct. It is 4-5 alphanumeric characters before the hyphen. In particular, please check O (letter) or 0 (number) and I (letter) or 1 (number).
• If your information is correct and you are still not able to view the requested certificates, Please Contact Us for more information.
• Please check that the lot number you have entered is correct. It is 7 alphanumeric characters. In particular, please check O (letter) or 0 (number) and I (letter) or 1 (number).
Sample C of A
This is a sample C of A and may not represent a recently manufactured lot of the product.
A sample C of A for this product is not available at this time.
Analytical Charts
Please enter Lot Number
Incorrect Lot Number. Please input only the 4-5 alphanumeric characters before the hyphen.
Incorrect Lot Number. Please input only the 7 alphanumeric characters.
The requested analytical chart is not available. Sorry for the inconvenience.