text.skipToContent text.skipToNavigation

Maximum quantity allowed is 999

请选择数量

CAS RN: 108-77-0 | 产品编码: C0460

Cyanuric Chloride


纯度/分析方法: >98.0%(T)
别名:
  • 三聚氯氰
  • 2,4,6-三氯-1,3,5-三嗪
  • 2,4,6-Trichloro-1,3,5-triazine
产品文档:
25G
S$34.50
10   ≥40  下单后约2周内可以发货
500G
S$69.00
2   ≥80  下单后约2-3个工作日内可以发货

* 订购TCI产品,请联系我们的经销商或 联系我们。
* TCI会时常优化储存条件,敬请留意。


产品编码 C0460
纯度/分析方法 >98.0%(T)
分子式/分子量 C__3Cl__3N__3 = 184.40 
外观与形状(20°C) 固体
储存温度 室温 (15°C以下阴凉干燥处)
储存在惰性气体下 存放于惰性气体之中
应避免的情况 湿气 (分解)
CAS RN 108-77-0
Reaxys-RN 124246
PubChem物质ID 87565581
SDBS (AIST Spectral DB) 3845
Merck Index (14) 2699
MDL编号

MFCD00006046

技术规格
Appearance White to Almost white powder to crystal
Purity(Argentometric Titration) min. 98.0 %
Melting point 145.0 to 150.0 °C
物性(参考值)
熔点 147 °C
溶解性(可溶于) 氯仿, 丙酮, 甲苯
GHS
象形图 Pictogram Pictogram Pictogram
信号词 Danger
危险性说明 H330 : Fatal if inhaled.
H302 : Harmful if swallowed.
H314 : Causes severe skin burns and eye damage.
H361 : Suspected of damaging fertility or the unborn child.
H370 : Causes damage to organs.
H372 : Causes damage to organs through prolonged or repeated exposure.
H373 : May cause damage to organs through prolonged or repeated exposure.
H317 : May cause an allergic skin reaction.
H334 : May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H336 : May cause drowsiness or dizziness.
防范说明 P501 : Dispose of contents/ container to an approved waste disposal plant.
P272 : Contaminated work clothing should not be allowed out of the workplace.
P260 : Do not breathe dust.
P270 : Do not eat, drink or smoke when using this product.
P202 : Do not handle until all safety precautions have been read and understood.
P201 : Obtain special instructions before use.
P271 : Use only outdoors or in a well-ventilated area.
P264 : Wash skin thoroughly after handling.
P280 : Wear protective gloves/ protective clothing/ eye protection/ face protection.
P284 : Wear respiratory protection.
P342 + P311 : If experiencing respiratory symptoms: Call a POISON CENTER/doctor.
P308 + P311 : IF exposed or concerned: Call a POISON CENTER/doctor.
P362 + P364 : Take off contaminated clothing and wash it before reuse.
P303 + P361 + P353 : IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.
P333 + P313 : If skin irritation or rash occurs: Get medical advice/ attention.
P301 + P330 + P331 : IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P301 + P312 + P330 : IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Rinse mouth.
P304 + P340 + P310 : IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor.
P305 + P351 + P338 + P310 : IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor.
P403 + P233 : Store in a well-ventilated place. Keep container tightly closed.
P405 : Store locked up.
相关法规
RTECS# XZ1400000
运输信息
UN编号 UN2670
类别 8
包装类别 II
HS编码* 2933.69-000
*此H.S.编码用于日本出口报关,不适用于您所在国家或地区的进口申报
应用
TCI Practical Example: Dehydration reaction of amides with cyanuric chloride

TCI Practical Example: Dehydration reaction of amides with cyanuric chloride

Used Chemicals

Procedure

To a solution of 4-bromobenzamide (300 mg, 1.5 mmol) in DMF (3 mL) was added cyanuric chloride (183 mg, 1.0 mmol, 0.67 eq.) at 0 °C. The mixture was stirred at r.t. for 3.5 hours and quenched with water (15 mL). The solution was extracted with ethyl acetate (15 mL x 3) and the organic layer was washed with 2 mol/L HCl (15 mL), sat. NaHCO3 aq. (15 mL), and brine (15 mL), dried over sodium sulfate and filtered. The solvent was removed under reduced pressure and the residue was purified by column chromatography (on silica gel, ethyl acetate:hexane = 1:4) to give 4-bromobenzonitrile as a pale white solid (260 mg, 95% yield).

Experimenter’s Comments

The reaction mixture was monitored by UPLC.

Analytical Data

4-bromobenzonitrile

1H NMR (400 MHz, CDCl3); δ 7.64 (d, J = 8.4 Hz, 2H), 7.53 (d, J = 8.4 Hz, 2H).

Lead Reference


应用
One-Pot Synthesis of Sulfonamides from Amine-Sulfonate Salts

Typical Procedure: To a solution of the amine (1 eq.) in a minimum amount of H2O-MeOH (60:40) is added the sulfonic acid (1 eq.). The reaction is stirred at room temperature for 15 min (the reaction is judged to be complete when pH paper indicates that the solution is neutral). The solution is evaporated under vacuum and the remaining solid is crystallized from hot MeOH. The crystals are dried in a vaccum oven for 24 h at 50℃. To a solution of the freshly prepared primary or secondary amine derived sulfonate salt (0.01 mol) in anhydrous MeCN (40 mL) is added cyanuric chloride (0.0033 mol) and the reaction mixture is stirred at room temperature for 30 min. Et3N (0.012 mol) is added and the solution is stirred for a further 30-90 min (until TLC indicates completion of the reaction). The reaction mixture is concentrated under vacuum and the residue is dissolved in CHCl3 (100 mL). The organic layer is washed with water (2 × 100 mL), dried over anhydrous Na2SO4 and evaporated in vacuo. The residue is purified by short column chromatography on silica gel eluting with a mixture of PE-EtOAc.

References


参考文献


技术文章
产品文档 (部分产品的分析图谱无法提供,敬请谅解。)
化学品安全说明书(SDS)
请选择语言。

如需更多帮助,请联系我 们。

技术规格
CoA及其他文档
请输入批号 批号输入有误。请输入中横线前的4-5个字母数字字符。

您查询的批号对应的产品已停产,相关文档将不再提供。请尝试该产品的其他批号。

示例 CoA
可下载CoA示例。注:该示例不一定是最新批次的CoA。

目前没有该产品的 CoA 示例。

分析图谱
请输入批号 批号输入有误。请输入中横线前的4-5个字母数字字符。

很抱歉,您搜索的分析图谱无法提供。

您查询的批号对应的产品已停产,相关文档将不再提供。请尝试该产品的其他批号。

其他文件

会话状态
当前会话将在10分钟后超时,并返回主页。请点击按钮继续浏览。分钟后超时,并返回主页。请点击按钮继续浏览。

您的会话已超时,将返回至主页。