Malondialdehyde Measurement Kit

×

纯度/分析方法:

别名：

• 丙二醛测定试剂盒

产品文档：

SDS | 技术规格 | CoA及其他文档 | 分析图谱

基本信息 | 技术规格和文件 | 安全和法规 | 应用实例・文献

补充产品信息

产品详情页面说明

规格	单价	同一天	2-3个工作日	左侧以上货期	数量	货期信息
1KIT	S$382.50	16	4	请联系我们		货期预估

* 订购TCI产品，请联系我们的经销商或 联系我们。
* TCI会时常优化储存条件，敬请留意。

添加到您的购物车

添加到购物车

大包装询价

Product Information

• Components : Acetic Acid 1 vial, Butylhydroxytoluene (BHT) solution 1 vial, Malonaldehyde Bis(dimethyl Acetal) (1 mM MDA solution) 1 vial, 2-Thiobarbituric Acid (TBH) 2 vials
• Size : 100 tests

Description

• This product allows determination of malondialdehyde content of your sample through thiobarbituric acid reactive substances (TBARS) method.

Direction for Use (for Measurement between 1 – 50 µM of Malondialdehyde)

• 1. Prepare a sample.
  2. Mix 50 µL of 1 mM MDA solution and 950 µL of deionized water to obtain a 50 µM solution of malondialdehyde.
  3. Prepare a 2x dilution series of the malondialdehyde solution from step 2 with 7 points total (0.78125 mM – 50 mM) of at least 250 µL each, to allow for duplicates. Deionized water should be prepared as a blank.
  4. Add 600 µL of DMSO to one of the vials of 2-Thiobarbituric Acid to dissolve. Accelerate the dissolution by voltexing or ultrasonic bath if the powder does not dissolve.
  5. Add 5.5 mL of Acetic Acid to the tube prepared in step 4 to prepare a 50 mM TBH solution.
  6. Add 25 µL of BHT solution and 100 µL of 50 mM TBH solution to 100 µL of each sample / point in the dilution series from step 3.
  7. Incubate at 95 °C for 15 minutes.
  8. Measure the absorbance at 532 nm.
  9. Create a standard curve to calculate the MDA concentration in the sample.