Maximum quantity allowed is 999
Please select the quantity
CAS RN: 36635-61-7 | Product Number: T1046
p-Toluenesulfonylmethyl Isocyanide
×
![]()
×
Purity: >98.0%(HPLC)(N)
Synonyms:
- TosMIC
- Tosylmethyl Isocyanide
Product Documents:
| Size | Unit Price | Same Day | 2-3 Business Days | Other Lead Time |
Shipping Information
|
|---|---|---|---|---|---|
| 5G |
NT$1,848
|
17 | ≥60 | Contact Us | |
| 25G |
NT$5,838
|
29 | ≥100 | Contact Us |
* The above prices include freight cost, customs, and other charges to the destination except for products that need to be shipped by sea or dry ice. For details, please contact
our distributor
in Taiwan to order our product.
* The storage conditions are subject to change without notice.
| Product Number | T1046 |
| Purity / Analysis Method | >98.0%(HPLC)(N) |
| Molecular Formula / Molecular Weight | C__9H__9NO__2S = 195.24 |
| Physical State (20 deg.C) | Solid |
| Storage Temperature | Room Temperature (Recommended in a cool and dark place, <15°C) |
| Store Under Inert Gas | Store under inert gas |
| Condition to Avoid | Moisture Sensitive |
| CAS RN | 36635-61-7 |
| Reaxys Registry Number | 2331606 |
| PubChem Substance ID | 87576847 |
| SDBS (AIST Spectral DB) | 15758 |
| Merck Index (14) | 9556 |
| MDL Number | MFCD00000005 |
Specifications
| Appearance | White to Yellow to Orange powder to crystal |
| Purity(HPLC) | min. 98.0 area% |
| Purity(with Total Nitrogen) | min. 98.0 % |
Properties (reference)
| Melting Point | 110 °C |
GHS
| Pictogram |
|
| Signal Word | Danger |
| Hazard Statements | H301 + H311 + H331 : Toxic if swallowed, in contact with skin or if inhaled. H315 : Causes skin irritation. H319 : Causes serious eye irritation. |
| Precautionary Statements | P501 : Dispose of contents/ container to an approved waste disposal plant. P261 : Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray. P270 : Do not eat, drink or smoke when using this product. P271 : Use only outdoors or in a well-ventilated area. P264 : Wash skin thoroughly after handling. P280 : Wear protective gloves/ protective clothing/ eye protection/ face protection. P337 + P313 : If eye irritation persists: Get medical advice/ attention. P305 + P351 + P338 : IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P361 + P364 : Take off immediately all contaminated clothing and wash it before reuse. P332 + P313 : If skin irritation occurs: Get medical advice/ attention. P301 + P310 + P330 : IF SWALLOWED: Immediately call a POISON CENTER/doctor. Rinse mouth. P302 + P352 + P312 : IF ON SKIN: Wash with plenty of water.Call a POISON CENTER/doctor if you feel unwell. P304 + P340 + P311 : IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor. P403 + P233 : Store in a well-ventilated place. Keep container tightly closed. P405 : Store locked up. |
Related Laws:
Transport Information:
| UN Number | UN2811 |
| Class | 6.1 |
| Packing Group | III |
| H.S.code* | 2930.90-900 |
Application
TCI Practical Example: Introduction of Cyano Group with Homologation Using TosMIC
-
Used Chemicals
-
- p-Toluenesulfonylmethyl Isocyanide (=TosMIC) [T1046]
- 2-Adamantanone [A0719]
- Potassium tert-Butoxide (= tBuOK) [P1008]
- 2,2-Dimethoxyethane (= DME)
- Ethanol (= EtOH)
-
Procedure
-
tBuOK (934 mg, 8.32 mmol, 2.5 eq.) was added to a solution of 2-adamantanone (500 mg, 3.33 mmol) and TosMIC (845 mg, 4.33 mmol, 1.3 eq.) in DME/EtOH (10.4 mL/0.8 mL), cooling with a water bath and the mixture was stirred for 30 minutes at room temperature. And then the reaction mixture was stirred for 4 hours at 40 °C. The reaction mixture was filtered and the insoluble was washed with DME. The filtrate was concentrated under reduced pressure to a volume of 2-3 mL, and the residue was charged with neutral alumina (10 g), eluted with a mixture of hexane:dichloromethane = 5:1 (60 mL) and concentrated under reduce pressure to give 2-cyanoadamantane as a white solid (441 mg, 82% yield).
-
Experimenter’s Comments
-
The reaction mixture was monitored by TLC (ethyl acetate:hexane = 1:10, Rf = 0.6).
-
Analytical Data
-
2-Cyanoadamantane
1H NMR (270 MHz, CDCl3); δ 2.90 (brs, 1H), 2.18-2.13 (m, 4H), 1.94-1.87 (m, 4H), 1.77-1.72 (m, 6H).
-
Lead Reference
-
- A Simple One-Step Synthesis of 2-Cyanoadamantane, a Precursor to Adamantane-2-Carboxylic Acid
-
Other Reference
-
- Discovery and Metabolic Stabilization of Potent and Selective 2-Amino-N-(adamant-2-yl) Acetamide 11β-Hydroxysteroid Dehydrogenase Type 1 Inhibitors
Application
Synthesis of Heterocyclic Compounds using TosMIC (Multicomponent Reactions)
Typical Procedure (Entry 3):
To a stirred solution of o-phenylenediamine (1.0 mmol) in toluene (20 mL), 4-chlorobenzaldehyde (1.0 mmol) is added and stirring is continued for 5 min. Then TosMIC (1.0 mmol) and DABCO (1.2 mmol) are added and the reaction mixture is heated to 80 °C for 4 h. The resulting solution is initially washed with 5% HCl, then with H2O and dried. The solvent is distilled off under reduced pressure to yield the corresponding crude product mixture, which is purified by silica gel chromatography (petroleum ether : EtOAc = 10 : 1) as eluent, to give the desired quinoxaline derivative in 84% yield as yellow crystals.
To a stirred solution of o-phenylenediamine (1.0 mmol) in toluene (20 mL), 4-chlorobenzaldehyde (1.0 mmol) is added and stirring is continued for 5 min. Then TosMIC (1.0 mmol) and DABCO (1.2 mmol) are added and the reaction mixture is heated to 80 °C for 4 h. The resulting solution is initially washed with 5% HCl, then with H2O and dried. The solvent is distilled off under reduced pressure to yield the corresponding crude product mixture, which is purified by silica gel chromatography (petroleum ether : EtOAc = 10 : 1) as eluent, to give the desired quinoxaline derivative in 84% yield as yellow crystals.
References
- Heterocyclizations via TosMIC-Based Multicomponent Reactions: A New Approach to One-Pot Facile Synthesis of Substituted Quinoxaline Derivatives.
PubMed Literature
Articles/Brochures
TCIMAIL
[Product Highlights] p-Toluenesulfonylmethyl Isocyanide Derivatives Effective in the Construction of Heterocyclic Compounds[TCI Practical Example] Introduction of Cyano Group with Homologation Using TosMIC
Product Documents (Note: Some products will not have analytical charts available.)
Safety Data Sheet (SDS)
Please select Language.
The requested SDS is not available.
Please Contact Us for more information.
Specifications
C of A & Other Certificates
Please enter Lot Number
Incorrect Lot Number. Please input only the 4-5 alphanumeric characters before the hyphen.
Sample C of A
This is a sample C of A and may not represent a recently manufactured lot of the product.
A sample C of A for this product is not available at this time.
Analytical Charts
Please enter Lot Number
Incorrect Lot Number. Please input only the 4-5 alphanumeric characters before the hyphen.
The requested analytical chart is not available. Sorry for the inconvenience.