Home >   Products   >  Advanced Search

4,4'-[1,2-Ethenediylbis(4,1-phenyleneiminocarbonyl)]bis(N-butyl-N,N-dimethylbenzenemethanaminium) Dichloride
(CAS RN:1296211-78-3 Product Number:E1127)

Structure

zoom
4,4'-[1,2-Ethenediylbis(4,1-phenyleneiminocarbonyl)]bis(N-butyl-N,N-dimethylbenzenemethanaminium) Dichloride

General Information

Product Number E1127

* Items available from stock in Japan will be delivered in 10 business days.
* Please contact us if you need further information.
(Sales Dept Tel: +44 1865 78 45 60 E-mail: Sales-UK@TCIchemicals.com)
* To send your quote request for bulk quantities, please click on the “Request Bulk Quotation” button. Please note that for some of our products we cannot offer bulk quantities.
* TCI frequently reviews storage conditions to optimize them. Please note that the latest information on the storage temperature for the products is described on our website.

Purity/Analysis Method >94.0%(T)
Storage Temperature
M.F. / M.W. C42H54Cl2N4O2=717.82
CAS RN 1296211-78-3
Related CAS RN
MDL Number
Packaging and Container
  • Product Details
  • Safety & Regulations

Specification

Purity(Nonaqueous Titration) min. 94.0 %

References

Reaxys-RN 22634941
PubChem SID 354333621

GHS

Pictogram
Signal Word Warning
Hazard Statements
  • H315
  • :Causes skin irritation.
  • H319
  • :Causes serious eye irritation.
Precautionary Statements
  • P264
  • :Wash hands and face thoroughly after handling.
  • P280
  • :Wear protective gloves, eye protection.
  • P302+P352+P332+P313+P362+P364
  • :IF ON SKIN: Wash with plenty of water. If skin irritation occurs: Get medical advice or attention. Take off contaminated clothing and wash it before reuse.
  • P305+P351+P338+P337+P313
  • :IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice or attention.

Transport Information

HS Number 2924297099

Application

Single-Walled Carbon Nanotube (SWCNT) Dispersant

E1127 has strong interaction to the surface of single-walled carbon nanotube (SWCNT), and the positive charge on the stilbene core enables SWCNT to disperse in aqueous solution. UV irradiation makes closure of the stilbene moiety and elimination from the SWCNT surface which enables SWCNT to aggregate. After the aggregation, the dispersant can be easily removed by filtration, etc.
(1) Preparation of dispersions (Low power sonication)
3.6 mg of E1127 was dissolved in 3 mL of pure water (18.8 MΩ·cm, TOC < 3 ppb) or D2O using a glass vial (ca. 0.12 wt%). The solution was then sonicated (80 W, 35 kHz) at room temperature. Heating by a dryer is also a useful method for solvation. 1.96 mg of SWCNTs was added into the solution of E1127. The E1127/SWCNT mixture was sonicated (80 W, 35 kHz, 1 h) at room temperature. The black-colored dispersion was then centrifuged to remove impurities such as amorphous carbons and metal particles (28500 x g, at 22 ºC, 3 hrs). Upper 70 % of supernatant was corrected as a well-dispersed SWCNT dispersion.

Figure 1. UV-vis-NIR absorption spectra of the E1127/SWCNT dispersion treated by low power sonication (in D2O, light pass length 0.5 mm).
(2) Preparation of dispersions (High power sonication)
10 mg of E1127 was dissolved in 20 mL of pure water (18.8 MΩ·cm, TOC < 3 ppb) or D2O using a glass vial (ca. 0.05 wt%). The solution was then sonicated (80 W, 35 kHz) at room temperature. Heating by a dryer is also a useful method for solvation. 7.0 mg of SWCNTs was added into the solution of E1127. The mixture was sonicated (80 W, 35 kHz, 1 h) at room temperature. Subsequently, the dispersion was subjected ultrasonication (60 W, 19 kHz, 4 hrs) at room temperature. The black-colored dispersion was then centrifuged to remove impurities such as amorphous carbons and metal particles (28500 x g, at 22 ºC, 3 hrs). Upper 70 % of supernatant was corrected as a well-dispersed SWCNT dispersion.

Figure 2. UV-vis-NIR absorption spectra of the E1127/SWCNT dispersion treated by high power sonication (in D2O, light pass length 0.5 mm).
(3) Photoirradiation and precipitation
A well-dispersed SWCNT dispersion was transferred to a dialysis tube (cutoff MW of 1000) to remove excess amount of E1127 from the dispersion. The tube filled with the dispersion of E1127/SWCNT system was put into a glass beaker with 3 L of pure water (18.8 MΩ·cm, TOC < 3 ppb) and was stirred overnight. The dialyzed dispersion was transferred into quartz cells and irradiated by an LED light source (365 nm, 100 mW/cm2) for several hours under magnetically stirring. After 3 hrs of light irradiation, precipitation of SWCNTs was completed for the dispersion treated with low power sonication. The SWCNT dispersion prepared using high power sonication took 7 hrs to recognize precipitation.

References

Page Top