Главная страница >   Продукция   >  Расширенный поиск

Tris(2,4-pentanedionato)iron(III)
(CAS RN:14024-18-1 Номер товара:I0079)

Структура

Tris(2,4-pentanedionato)iron(III)
Синоним Acetylacetone Iron(III) Salt
Синоним Ferric(III) Acetylacetonate
Синоним Iron(III) Acetylacetonate

Общая информация

Номер товара I0079

* Товары в наличии на складе в Японии будет доставлен в течение 10 рабочих дней.
* Пожалуйста, свяжитесь с нами, если вам нужна дополнительная информация. (электронная почта: Sales-EU@TCIchemicals.com)
*По запросу возможны поставки до нескольких тонн. Для получения предложения, пожалуйста, кликните на кнопку справа и заполните специальную форму. Некоторые продукты могут быть недоступны в балк-упаковках.
* TCI регулярно пересматривает условия хранения для обеспечения их оптимальности. Обратите внимание, что самая последняя информация о температурах хранения продуктов TCI размещена на нашем сайте.

Чистота/Метод анализа >98.0%(T)
Температура хранения
M.F. / M.W. C15H21FeO6=353.17
CAS RN 14024-18-1
Связанный CAS RN
Номер MDL MFCD00000020
упаковка и тара
  • Подробнее
  • Безопасность и нормативные требования

Спецификация

Purity(Chelometric Titration) min. 98.0 %
Solubility in Toluene almost transparency

Ссылки

PubChem SID 87571482
F&F 6,304
RTECS номер NO8960000
EINECS-номер 237-853-5

СГС

Знаки опасности
Сигнальное слово Warning
Опасные и токсичные свойства
  • H302
  • :Harmful if swallowed.
  • H315
  • :Causes skin irritation.
  • H319
  • :Causes serious eye irritation.
Уведомление
  • P264
  • :Wash hands and face thoroughly after handling.
  • P270
  • :Do not eat, drink or smoke when using this product.
  • P280
  • :Wear protective gloves, eye protection.
  • P301+P312+P330
  • :IF SWALLOWED: Call a POISON CENTER or doctor if you feel unwell. Rinse mouth.
  • P302+P352+P332+P313+P362+P364
  • :IF ON SKIN: Wash with plenty of water. If skin irritation occurs: Get medical advice or attention. Take off contaminated clothing and wash it before reuse.
  • P305+P351+P338+P337+P313
  • :IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice or attention.

Информация о доставке

HS-код 2914199090

Заявка

2-PySO2CF2H : Bench-stable Difluoromethylating Agent for Catalytic Difluoromethylation

D5390, I0079

References

Iron/dppbz-catalyzed Decarboxylative Couplings of Active Esters

I0079

In a screwed-capped vial active ester (0.1 mmol), Fe(acac)3 (0.005 – 0.04 mmol) and dppbz (0.006 – 0.048 mmol) are weighed. The vial is then sealed, evacuated and back-filled with Ar. Then, 0.5 mL of distilled THF is added. The mixture is stirred for 5 minutes under Ar and diarylzinc reagent in THF (ca. 0.3 mol/L, 0.15 – 0.25 mmol) is added in one portion at 0 - 25 ºC to the mixture and stirred at the same temperature for 1 h. After this time, the reaction is quenched with 1 mol/L HClaq, sat. NH4Claq or H2O and diluted with diethyl ether. The organic layer is separated and dried over Na2SO4 anhydrous, filtered and evaporated to dryness. Pure products are obtained after column chromatography or preparative TLC.

References

Iron-Catalyzed ortho-Alkylation of Carboxamides

I0079

Typical procedure (R = benzyl): To Fe(acac)3 (17.1 mg, 0.05 mmol), dppe (29.9 mg, 0.075 mmol), and 3-methyl-N-(quinolin-8-yl)benzamide (131 mg, 0.5 mmol) are added THF (4 mL), and benzyl chloride (190 mg, 1.5 mmol). The mixture is then placed in an oil bath at 65 °C and PhMgBr (16% in THF, ca. 1 mol/L) (0.6 mL, 0.6 mmol) is added in a single portion. Upon completion of PhMgBr addition, the reaction mixture is stirred at 65 °C for 1 min. Then PhMgBr (16% in THF, ca. 1 mol/L) (1.3 mL, 1.3 mmol) is added dropwise at 65 °C for 9 min. The reaction mixture is stirred at 65 °C for 1 min and brought to rt. Subsequently the reaction mixture is quenched with a saturated solution of ammonium chloride (535 mg, 0.01 mol) and extracted with dichloromethane (3 x 3 mL). The combined organic extracts are dried over MgSO4, filtered and concentrated to give a residue. The residue is purified by silica gel flash chromatography (eluent: hexanes/EtOAc = 20:1) to give 2-benzyl-5-methyl-N-(quinolin-8-yl)benzamide (175 mg, 99% yield) as a white solid.

References

Efficient Fe/Cu Co-Catalyzed C-N Cross-Coupling Reaction

Typical procedure (Entry 1): A Schlenk tube is charged with p-anisidine (92.4 mg), K2CO3 (138 mg), Fe(acac)3 (34.4 mg), and Cu(OAc)2• H2O (20 mg). Under a nitrogen atmosphere, 4-bromotoluene (85.5 mg) is added followed by dry DMF (0.8 mL). The reaction mixture is then heated to 135 ºC, and stirred for 20 h. The mixture is cooled to room temperature and diluted with diethyl ether. The resulting suspension is filtered through a celite pad and the filtrate is concentrated. The residue is purified by column chromatography on silica gel (eluent: petroleum ether/ethyl acetate) to give 4-methoxy-N-p-tolylaniline (98.1 mg, 92 %).

References

Iron-Catalyzed Cross-Coupling Reaction

References

Сопутствующие товары

Вверх страницы