Sign up for free shipping on all website orders, no minimum required, and get exclusive coupons!
Users can now ask questions to the AI chatbot by clicking the chatbot icon in the bottom-right corner of the website.
Maximum quantity allowed is 999
* Items in stock locally typically ship the same day of ordering. Items from Japan stock are able to ship from a US warehouse within 2 weeks after ordering. For additional estimated shipment times, please refer to the Shipping Simulation tool. Note: Excludes regulated items and items that ship on ice.
* To send your quote request for bulk quantities, please click on the "Request Quote" button. Please note that we cannot offer bulk quantities for some products.
*TCI frequently reviews storage conditions to optimize them. Please note that the latest information on the storage temperature for the products is described on our website.
| Product Number | S0480 |
Purity / Analysis Method
|
>95.0%(T) |
| Molecular Formula / Molecular Weight | NaBH__4 = 37.83 |
| Physical State (20 deg.C) | Solid |
Storage Temperature
|
Room Temperature (Recommended in a cool and dark place, <15°C) |
| Store Under Inert Gas | Store under inert gas |
| Condition to Avoid | Moisture Sensitive |
| CAS RN | 16940-66-2 |
| Reaxys Registry Number | 11343078 |
| PubChem Substance ID | 87575954 |
| Merck Index (14) | 8592 |
| MDL Number | MFCD00003518 |
| Appearance | White to Almost white powder to crystal |
| Purity(Sodium hypochlorite Method) | min. 95.0 % |
| Solubility in water | Soluble |
| Solubility (insoluble in) | Ether |
| Pictogram |
|
| Signal Word | Danger |
| Hazard Statements | H301 + H311 : Toxic if swallowed or in contact with skin. H314 : Causes severe skin burns and eye damage. H360 : May damage fertility or the unborn child. H260 : In contact with water releases flammable gases which may ignite spontaneously. |
| Precautionary Statements | P501 : Dispose of contents/ container to an approved waste disposal plant. P223 : Do not allow contact with water. P260 : Do not breathe dusts or mists. P270 : Do not eat, drink or smoke when using this product. P202 : Do not handle until all safety precautions have been read and understood. P231 + P232 : Handle under inert gas. Protect from moisture. P201 : Obtain special instructions before use. P264 : Wash skin thoroughly after handling. P280 : Wear protective gloves/ protective clothing/ eye protection/ face protection. P370 + P378 : In case of fire: Use dry sand, dry chemical or alcohol-resistant foam to extinguish. P335 + P334 : Brush off loose particles from skin. Immerse in cool water/ wrap in wet bandages. P308 + P313 : IF exposed or concerned: Get medical advice/ attention. P303 + P361 + P353 : IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. P301 + P330 + P331 : IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P362 : Take off contaminated clothing and wash before reuse. P301 + P310 + P330 : IF SWALLOWED: Immediately call a POISON CENTER/doctor. Rinse mouth. P304 + P340 + P310 : IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor. P305 + P351 + P338 + P310 : IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor. P402 + P404 : Store in a dry place. Store in a closed container. P405 : Store locked up. |
| RTECS# | ED3325000 |
| UN Number (DOT-AIR) | UN1426 |
| Class (DOT-AIR) | 4.3 |
| Packing Group (TCI-A) | I |
| HS Number | 2850.00.5000 |
Sodium borohydride (250 mg, 6.70 mmol) was separately added to a solution of 4',5'-dimethoxy-2'-nitroacetophenone (1.50 g, 6.70 mmol) in THF (12 mL) and methanol (3 mL) at 0 °C. Then the mixture was allowed to warm to room temperature and stirred for 1.5 hours. The solution was diluted with dichloromethane (15 mL) and washed with water (15 mL x 3) and brine (15 mL), dried over sodium sulfate and filtered. The solvent was removed under reduced pressure. The residue was diluted with THF (6 mL) and the mixture was stirred at 37 °C. Hexane (10 mL) was added to the solution and the mixture was stirred at 0 °C and filtered to give 1 (1.16 g、77%) as a yellow solid.
The reaction mixture was monitored by TLC (hexane:ethyl acetate = 1:1, Rf = 0.47) and UPLC.
To avoid moisture absorption of sodium borohydride, weighing was done quickly.
Compound 1
1H NMR (400 MHz, CDCl3); δ 7.57 (s, 1H), 7.31 (s, 1H), 5.58 (q, J = 5.4 Hz, 1H), 4.01 (s, 3H), 3.95 (s, 3H), 1.56 (d, J = 5.4 Hz, 3H).



The requested SDS is not available.
Please Contact Us for more information.
A sample C of A for this product is not available at this time.
The requested analytical chart is not available. Sorry for the inconvenience.