Maximum quantity allowed is 999
请选择数量
CAS RN: 3849-21-6 | 產品號碼: E0847
Ethyl Cyano(hydroxyimino)acetate
×
![]()
×
* 以上價格已含運費關稅等但一些需要海運以及乾冰運輸的產品除外,詳情請與
當地經銷商
洽詢。
* TCI會時常優化儲存條件,儲存溫度請以在線目錄為準，敬請留意。
產品規格
| Appearance | White to Almost white powder to crystal |
| Purity(GC) | min. 98.0 % |
| Melting point | 131.0 to 135.0 °C |
性質
| 熔點 | 133 °C |
| 溶解性（可溶於） | Methanol |
GHS
| 圖形表示 |
|
| 信號詞 | Warning |
| 危險性說明 | H302 + H312 + H332 : Harmful if swallowed, in contact with skin or if inhaled. H315 : Causes skin irritation. H319 : Causes serious eye irritation. |
| 防範說明 | P501 : Dispose of contents/ container to an approved waste disposal plant. P261 : Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray. P270 : Do not eat, drink or smoke when using this product. P271 : Use only outdoors or in a well-ventilated area. P264 : Wash skin thoroughly after handling. P280 : Wear protective gloves/ protective clothing/ eye protection/ face protection. P337 + P313 : If eye irritation persists: Get medical advice/ attention. P305 + P351 + P338 : IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P362 + P364 : Take off contaminated clothing and wash it before reuse. P332 + P313 : If skin irritation occurs: Get medical advice/ attention. P301 + P312 + P330 : IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Rinse mouth. P302 + P352 + P312 : IF ON SKIN: Wash with plenty of water.Call a POISON CENTER/doctor if you feel unwell. P304 + P340 + P312 : IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell. |
相關法規
運輸資料
| HS編碼* | 2928.00-000 |
Application
Oxyma: An Efficient Additive for Peptide Synthesis to Replace HOBt and HOAt
Experimental procedure4): a mixture of 1 (0.12 mmol), EDC·HCl (28 mg, 0.15 mmol, 1.2 eq.), Oxyma (20 mg, 0.15 mmol, 1.2 eq.), and DIEA (52 µL, 0.29 mmol, 2.4 eq.) in DMF (1.2 mL) is stirred for 15 min, and then 2 (0.12 mmol) is added. The mixture is stirred at room temperature for 20 hr and diluted with EtOAc. The organic phase is washed with 0.5 mol/L HCl, 5% LiCl, saturated aqueous NaHCO3, and brine, dried over Na2SO4 and concentrated in vacuo. The crude product is purified with silica column chromatography eluting with 3:2 hexanes:EtOAc to yield 3 (48 mg, 0.10 mmol, 82% yield) as a white solid.
References
- 1)Oxyma: An Efficient Additive for Peptide Synthesis to Replace the Benzotriazole-Based HOBt and HOAt with a Lower Risk of Explosion[1]
- 2)Sulfonate esters of 1-hydroxypyridin-2(1H)-one and ethyl 2-cyano-2-(hydroxyimino)acetate (oxyma) as effective peptide coupling reagents to replace 1-hydroxybenzotriazole and 1-hydroxy-7-azabenzotriazole
- 3)Ethyl 2-cyano-2-(hydroxyimino)acetate (Oxyma): an efficient and convenient additive used with tetramethylfluoroformamidinium hexafluorophosphate (TFFH) to replace 1-hydroxybenzotriazole (HOBt) and 1- hydroxy-7-azabenzotriazole (HOAt) during peptide synthesis
- 4)Heterogeneous H-Bonding in a Foldamer Helix
考研文獻
產品介紹報導
產品文件 （部分產品的分析圖譜無法提供，敬請諒解。）
SDS
請選擇語言。
請求的SDS不可用。
如需更多幫助，請聯繫我們 。
產品規格
檢驗報告(CoA)及其他文檔
請輸入批號
輸入的批號不正確
示例 CoA
可下載CoA示例。注：該示例可能非最新批次的CoA。
目前沒有該產品的 CoA 示例。
分析圖譜
請輸入批號
輸入的批號不正確
很抱歉，您搜索的分析圖譜無法提供。