Product Document Searching Made Easy by 2D Code! | TCI Chemistry News November 2025 | [TCIPracticalExample] The Z-Selective Horner-Wadsworth-Emmons Reaction... | Various analytical charts can be searched on each product detail page and Product Document Search (The kinds of analytical charts differ by product)
Maximum quantity allowed is 999
请选择数量
CAS RN: 19481-79-9 | 產品號碼: I0954
2-Iodo-2-methylpropionitrile
* 以上價格已含運費關稅等但一些需要海運以及乾冰運輸的產品除外,詳情請與
當地經銷商
洽詢。
* TCI會時常優化儲存條件,儲存溫度請以在線目錄為準,敬請留意。
補充產品訊息:
This product is easily decomposed by light.
Please minimize light exposure and use in a darkened place.
產品規格
| Appearance | Light yellow to Brown clear liquid |
| Purity(GC) | min. 96.0 % |
性質
| 沸點 | 62 °C/15 mmHg |
| flp | 69 °C |
| 折射率 | 1.52 |
GHS
| 圖形表示 |
|
| 信號詞 | Danger |
| 危險性說明 | H301 + H311 + H331 : Toxic if swallowed, in contact with skin or if inhaled. H315 : Causes skin irritation. H319 : Causes serious eye irritation. H341 : Suspected of causing genetic defects. H227 : Combustible liquid. |
| 防範說明 | P501 : Dispose of contents/ container to an approved waste disposal plant. P270 : Do not eat, drink or smoke when using this product. P202 : Do not handle until all safety precautions have been read and understood. P261 : Avoid breathing mist or vapors. P210 : Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P201 : Obtain special instructions before use. P271 : Use only outdoors or in a well-ventilated area. P264 : Wash skin thoroughly after handling. P280 : Wear protective gloves/ protective clothing/ eye protection/ face protection. P370 + P378 : In case of fire: Use dry sand, dry chemical or alcohol-resistant foam to extinguish. P308 + P313 : IF exposed or concerned: Get medical advice/ attention. P337 + P313 : If eye irritation persists: Get medical advice/ attention. P305 + P351 + P338 : IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P361 + P364 : Take off immediately all contaminated clothing and wash it before reuse. P332 + P313 : If skin irritation occurs: Get medical advice/ attention. P301 + P310 + P330 : IF SWALLOWED: Immediately call a POISON CENTER/doctor. Rinse mouth. P302 + P352 + P312 : IF ON SKIN: Wash with plenty of water.Call a POISON CENTER/doctor if you feel unwell. P304 + P340 + P311 : IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor. P403 + P233 : Store in a well-ventilated place. Keep container tightly closed. P403 : Store in a well-ventilated place. P405 : Store locked up. |
相關法規
運輸資料
| UN編號 | UN3276 |
| 類別 | 6.1 |
| 包裝類別 | III |
| HS編碼* | 2926.90-000 |
Application
A Practical Living Radical Polymerization with Sodium Iodide as a Catalyst

Typical Procedure (a bulk polymerization):
A mixture of methyl methacrylate (801 g, 8 mol), 2-iodo-2-methylpropionitrile (15.6 g, 80 mmol), sodium iodide (6 g, 40 mmol), and 18-crown-6-ether (10.6 g, 40 mmol) is heated in a flask at 70 °C for 4 h under an argon atmosphere with stirring. An aliquot (0.1 mL) of the solution is taken out by a syringe, cooled to room temperature, diluted by THF or DMF to a known concentration, and analyzed by gel permeation chromatography (GPC), yielding the polymer with Mn = 8200 and Mw/Mn = 1.16 (monomer conversion = 83%).
A mixture of methyl methacrylate (801 g, 8 mol), 2-iodo-2-methylpropionitrile (15.6 g, 80 mmol), sodium iodide (6 g, 40 mmol), and 18-crown-6-ether (10.6 g, 40 mmol) is heated in a flask at 70 °C for 4 h under an argon atmosphere with stirring. An aliquot (0.1 mL) of the solution is taken out by a syringe, cooled to room temperature, diluted by THF or DMF to a known concentration, and analyzed by gel permeation chromatography (GPC), yielding the polymer with Mn = 8200 and Mw/Mn = 1.16 (monomer conversion = 83%).
References
Application
Alkyl Iodide Initiators for Organocatalyzed Living Radical Polymerization
General Scheme of Organocatalyzed Living Radical Polymerization1-5)

Goto et al. have reported that alkyl iodides are efficient initiators for organocatalyzed living radical polymerization which is a new family of living radical polymerization. Organic amines, organic salts and sodium iodide are used as catalysts. 1-5) Low polydispersity and metal free polymers can be obtained by using this method.
Ranges of Effective Alkyl Iodides in the Polymerizations of Methyl Methacrylate (MMA) and Butyl Acrylate (BA)1)

These alkyl iodides are effective initiators in methyl methacrylate (MMA) [M0087] and butyl acrylate (BA) [A0142] polymerizations using tributylmethylphosphonium iodide (BMPI) [M1455] or tetrabutylammonium iodide (BNI) [T0057] as a catalyst. Low-polydispersity polymers are obtainable.1)
References
- 1) a) Systematic Study on Alkyl Iodide Initiators in Living Radical Polymerization with Organic Catalysts
- b) A. Goto, T. Fukuda, Y. Tsujii, US 7399814, 2008.
- c) A. Goto, PCT Int. Appl. WO 2015122404, 2015.
- 2) Reversible Generation of a Carbon-Centered Radical from Alkyl Iodide Using Organic Salts and Their Application as Organic Catalysts in Living Radical Polymerization
- 3) Photocontrolled Organocatalyzed Living Radical Polymerization Feasible over a Wide Range of Wavelengths
- 4) Living Radical Polymerization with Alkali and Alkaline Earth Metal Iodides as Catalysts
- 5) The other related patents
- JP Patent No. 5850599, 5697026, 5881292, 5645165 and 5610402. JP Patent Appl. No. 2013-529906.
PubMed Literature
產品介紹報導
[Research Articles] A Practical Living Radical Polymerization with Sodium Iodide as a Catalyst[TCIMAIL No.185] Alkyl Iodide Initiators for Organocatalyzed Living Radical Polymerization
產品文件 (部分產品的分析圖譜無法提供,敬請諒解。)
SDS
請選擇語言。
請求的SDS不可用。
如需更多幫助,請聯繫我們 。
產品規格
檢驗報告(CoA)及其他文檔
請輸入批號
輸入的批號不正確
示例 CoA
可下載CoA示例。注:該示例可能非最新批次的CoA。
目前沒有該產品的 CoA 示例。
分析圖譜
請輸入批號
輸入的批號不正確
很抱歉,您搜索的分析圖譜無法提供。
