text.skipToContent text.skipToNavigation

Maximum quantity allowed is 999

请选择数量

CAS RN: | 產品號碼: R0236

rLSL-N-LecBeads [for Galβ(1-4)GlcNAc, poly LacNAc]


純度/分析方法:
别名:
  • rLSL-N-Agarose
  • Recombinant Laetiporus sulphureus lectin N-Terminal Domain (= rLSL-N)-Agarose
文件:
1VIAL
NT$17,178
3   1   聯繫我們

* 以上價格已含運費關稅等但一些需要海運以及乾冰運輸的產品除外,詳情請與 當地經銷商 洽詢。
* TCI會時常優化儲存條件,儲存溫度請以在線目錄為準,敬請留意。


補充產品訊息:

Product information
Product code : R0236
Product name : rLSL-N-LecBeads [for Galβ(1-4)GlcNAc, poly LacNAc]
Preparation : Recombinant LSL-N is covalently coupled with agarose gel
Quantity : 1 ml gel/2 ml (1:1, v/v slurry) suspended in PBS, pH7.5
Protein concentration : about 10 mg/ml gel
Binding capacity : >12 mg of glycoprotein (asialo human Transferrin) /ml gel
Preservative : 0.02% [w/v] Sodium azide
Stabilizer : None

Description
The rLSL-N is an Escherichia coli recombinant of N-terminal domain of carbohydrate-binding protein (Lectin) derived from Laetiporus sulphureus. This lectin preferably binds to [Galβ(1-4)GlcNAc, poly LacNAc] glycan epitopes (It very slightly interacts with lactose).
The LecBeads is a lectin-immobilized agarose which is capable of capturing glycoproteins via binding to its specific epitope(s), and it is prepared by a covalent coupling method between lectin and agarose.
The Lectin-catch method using LecBeads (as shown in Application tab) is available for selective separation of glycoconjugates (glycoproteins, glycolipids, and so on). This LSL-N-LecBeads (1 ml gel) shows a binding capacity of about 12 mg or more asialo human Transferrin [asialo hTF] through its binding to a terminal [Galβ(1-4)GlcNAc] glycan epitope on asialo hTF.

Storage
Store at 2-10°C. (Avoid freezing).

Related Products
R0226 Recombinant Laetiporus sulphureus lectin N-Terminal Domain (= rLSL-N) expressed in Escherichia coli
R0231 rLSL-N-Biotin [for Galβ(1-4)GlcNAc, poly LacNAc]
R0235 rPSL1a-LecBeads [for Siaα(2-6)Gal]
R0237 rMOA-LecBeads [for Galα(1-3)Gal]
R0238 rSRL-LecBeads [for GlcNAcβ(1-2)Man, Galβ(1-3)GalNAc]
R0239 rGRFT-LecBeads [for Manα(1-2)Man]
A3331 AOL-LecBeads [for Fucα(1-6)/α(1-4)/α(1-3)/α(1-2)]

產品號碼 R0236
外觀與形狀(20°C) Liquid
儲存條件 Refrigerated (0-10°C)
應避免的情況 Heat Sensitive
產品規格
Appearance White to Almost white clear liquid to cloudy liquid
Concentration(Lowry method) min. 9.0 mg/mL gel
Binding capacity to pass test(min. 10 mg/mL gel, Asialo-human transferrin)
性質
GHS
相關法規
運輸資料
HS編碼* 3504.00-000
*此H.S.編碼用於日本出口報關, 不適用於您所在國家或地區的進口申報
Application
The lectin-catch procedure

< Preparation >
Buffers
Binding buffer : PBS pH7.5
Elution buffer : PBS pH7.5 containing 200 mM lactose [Product code: L0008] and 0.1% triton-X100 [Product code: P1775]

< Method of the lectin-catch > ※Centrifuge method

Equilibration

  • Prepare the LecBeads in a new tube.
  • Add the Binding buffer into the tube to equilibrate the gel.
  • Centrifuge the tube at 800 ×g for 3 min and discard the supernatant. (If necessary, repeat equilibration with the Binding buffer >10-fold volume of the LecBeads appropriately.)

Binding

  • Concentrate or dilute the glycoprotein sample to moderate concentration (e.g., 1 mg/ml) with the Binding buffer [Input fraction], and apply the prepared sample to the tube in which the LecBeads was preliminary equilibrated.
  • Agitate the tube at 4°C (※Generally, a dissociation constants (Kd value) of lectins are tend to be decreased at lower temperature) for a few hours (or overnight).
  • Centrifuge the tube at 800 ×g for 3 min and remove the supernatant [Through fraction].
  • Wash the LecBeads by 5 (to 10)-fold of the slurry volume with the Binding buffer several times.


Elution

  • Elute the glycoprotein from the LecBeads by agitation with an appropriate volume of the Elution buffer (e.g. same volume of the LecBeads).
  • Agitate the reaction tube at 4°C or R.T. for a few hours (or overnight).
  • Centrifuge the tube at 800 ×g for 3 min and remove the supernatant [Elution fraction].
  • Check the resulting fractions ([Input fraction] [Through fraction] [Elution fraction]) by protein assay and SDS-PAGE. (In some cases, the repetitive elution step with a small volume of the Elution buffer might improve the elution effect. If necessary, repeat elution steps.)
  • The competitive oligosaccharide included in the obtained elution fractions can be removed by ultrafiltration or dialysis using a sufficient amount of buffer.

 

References


產品文件 (部分產品的分析圖譜無法提供,敬請諒解。)
SDS
請選擇語言。

請求的SDS不可用。

如需更多幫助,請聯繫我們

產品規格
檢驗報告(CoA)及其他文檔
請輸入批號 輸入的批號不正確

所搜尋批次號碼的產品已停產,且相關文件已無法取得。 請嘗試此產品的其他批號。

示例 CoA
可下載CoA示例。注:該示例可能非最新批次的CoA。

目前沒有該產品的 CoA 示例。

分析圖譜
請輸入批號 輸入的批號不正確

很抱歉,您搜索的分析圖譜無法提供。

所搜尋批次號碼的產品已停產,且相關文件已無法取得。 請嘗試此產品的其他批號。

其他文件

會話狀態
當前會話將在10分鐘後超時,並返回主頁。請點擊按鈕繼續瀏覽。分鐘後超時,並返回主頁。請點擊按鈕繼續瀏覽。

您的會話已超時,將返回至主頁。