Performance of Quinacridone[Q0083]-based OFETs

Fabrication and evaluation of vacuum-deposited Quinacridone [Q0083]-based OFETs

< Substrate >

• Bare Si/SiO₂ (thickness of SiO₂：200 nm)
• ODTMS-treated Si/SiO₂ (thickness of SiO₂：200 nm)

< Self-Assembly Monolayer (SAM) Treatment >

• Octadecyltrimethoxysilane (ODTMS) [O0256]
  1. Piranha etching (H₂SO₄:H₂O₂=4:1, 80 ºC, 2 h)
  2. Ultrasonication (Deionized water, Acetone, IPA, 10 min each)
  3. Exposure to vapor (IPA, 3 min)
  4. UV/O₃ treatment (1 h)
  5. Spin-coating of ODTMS solution (3 mM Trichloroethyrene, 3000 RPM, 60 sec)
  6. Exposure to ammonium vapor
     (The substrates were placed together in a desiccator with a vial of ammonium hydroxide for 16 h)
  7. Ultrasonication (Toluene, Acetone, IPA, 10 min each)

< Vacuum Deposition >

• Deposition rate of Quinacridone [Q0083]: 0.15 Å/s (under a pressure of∼10⁻⁴ Pa)
• Substrate temperature during deposition: RT
• Deposition rate of Au: 0.2 Å/s (under a pressure of∼10⁻⁴ Pa)

< Device Configuration >

• [n⁺-Si/SiO (200 nm) / Quinacridone [Q0083] (60 nm) / Au (40 nm)]
• Top-Contact Bottom-Gate Type (TCBG)
• Channel Length: 50 μm
• Channel width: 1.5 mm

< Evaluation Condition >

• Characteristics of OFET devices were measured in a nitrogen glove box.
• Field-effect mobilities (μ) were determined from the transfer curves in the saturation regime using the following equation:
  I_D = (W/2L) μ Ci (V_G − V_th)²