Thiol Quantification Kit

×

Zuiverheid:

Synoniemen

• Sulfhydryl Quantification Kit

Productdocumenten:

SDS | Specificatie | Analyse certificaat & andere certificaten | Analytische grafieken

Algemene informatie | Specificaties en eigenschappen | Veiligheid en regelgeving | Toepassing & Literatuur

Aanvullende productinformatie

Toelichting bij deze pagina

Afmeting	Eenheidsprijs	België	Japan*	Hoeveelheid
1KIT	€513.00	Neem contact met ons op	16

*Stock beschikbaar uit voorraad in België leverbaar in 1 tot 3 dagen
*stock beschikbaar uit voorraad in Japan leverbaar in 1 tot 2 weken (met uitzondering van gereguleerde producten en zendingen met droog ijs)

Toegevoegd aan uw winkelwagen

Voeg toe aan winkelmandje

Bulkofferte aanvragen

Product Information

Description

This kit consists of three components; 5,5'-Dithiobis(2-nitrobenzoic Acid) (DTNB, Ellman’s reagent), N-Acetyl-L-cysteine (NAC), and Diluent Buffer. Reaction of DTNB with SH groups causes the solution containing them to turn yellow in color. Use of an N-Acetyl-L-cysteine standard curve allows for the quantification of SH group concentration via absorbance measurement at 412 nm.

Storage

Store at 4 °C. Use within 6 months.

Direction for Use

1. Prepare an SH group-containing sample, using Diluent Buffer to increase the volume to 200 µL if necessary.
2. Add 1 mL of Diluent Buffer to 1 vial of N-Acetyl-L-cysteine to prepare a 10 mM NAC standard solution. Dissolve carefully by vortexing.
3. Preparation of an NAC dilution series:
   Dilute the 10 mM NAC standard solution prepared in step 2 10-fold with Diluent Buffer to make a 1000 µM NAC solution (of greater than 400 µL); further dilute this solution two-fold six additional times using Diluent Buffer such that you obtain seven samples (each greater than 200 µL in volume). The dilution series comprises these seven samples, along with a blank containing only Diluent Buffer. The concentration range this dilution series offers is appropriate in many cases, however if you plan on measuring a more dilute sample, adjust concentrations as needed.
4. Aliquot 100 µL of each sample or NAC solution to each of two wells of a 96-well plate.
5. Prepare DTNB solution by adding 1 mL of Diluent Buffer to 1 vial of DTNB. Dissolve carefully by vortexing. (Use DTNB solution as quickly as possible following preparation.)
6. Add 15 µL of this DTNB solution to each well.
7. Incubate at room temperature for 10 minutes.
8. Measure the absorbance at 412 nm. (Broad range measurement from 380 - 440 nm is also possible.)
9. Create a standard curve by plotting the absorbance of each standard solution against its SH concentration in μM. Use this standard curve to determine the SH concentration of your samples.

Related Products