Maximum quantity allowed is 999
Please select the quantity
CAS RN: 12112-67-3 | Product Number: C1807
Chloro(1,5-cyclooctadiene)iridium(I) Dimer
×
Purity: >93.0%(T)
Synonyms:
- Bis(1,5-cyclooctadiene)diiridium(I) Dichloride
Product Documents:
| Size | Unit Price | Same Day | 2-3 Business Days | Other Lead Time |
Shipping Information
|
|---|---|---|---|---|---|
| 250MG |
$114.00
|
19 | 20 | It can be shipped in about 2 weeks after ordering | |
| 1G |
$346.00
|
39 | ≥100 | It can be shipped in about 2 weeks after ordering |
* Please contact our distributors or
TCI
to order our products. The above prices do not include freight cost, customs, and other charges to the destination.
* The storage conditions are subject to change without notice.
| Product Number | C1807 |
Purity / Analysis Method 
|
>93.0%(T) |
| Molecular Formula / Molecular Weight | C__1__6H__2__4Cl__2Ir__2 = 671.70 |
| Physical State (20 deg.C) | Solid |
| Storage Temperature
|
Refrigerated (0-10°C) |
| Store Under Inert Gas | Store under inert gas |
| Condition to Avoid | Air Sensitive,Heat Sensitive |
| Packaging and Container
|
1G-Glass Bottle with Plastic Insert (View image), 250MG-Glass Bottle with Plastic Insert (View image) |
| CAS RN | 12112-67-3 |
| Reaxys Registry Number | 14372408 |
| PubChem Substance ID | 87560730 |
| MDL Number | MFCD00012414 |
Specifications
| Appearance | Orange to Amber to Dark red powder to crystal |
| Purity(Argentometric Titration) | min. 93.0 % |
Properties (reference)
| Melting Point | 205 °C(dec.) |
| Solubility in water | Insoluble |
GHS
| Pictogram |
|
| Signal Word | Warning |
| Hazard Statements | H315 : Causes skin irritation. H319 : Causes serious eye irritation. |
| Precautionary Statements | P264 : Wash skin thoroughly after handling. P280 : Wear protective gloves/ eye protection/ face protection. P302 + P352 : IF ON SKIN: Wash with plenty of water. P337 + P313 : If eye irritation persists: Get medical advice/ attention. P305 + P351 + P338 : IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P362 + P364 : Take off contaminated clothing and wash it before reuse. P332 + P313 : If skin irritation occurs: Get medical advice/ attention. |
Related Laws:
Transport Information:
| H.S.code* | 2843.90-000 |
Application
Iridium / Axially Chiral Phosphoramidite Complex Catalyzed Allylic Substitution of Allyl Carbonate Derivatives
In a nitrogen-filled atmosphere, [Ir(cod)Cl]2 (2.7 mg, 0.0040 mmol), the ligand (4.3 mg, 0.0080 mmol), KF (12 mg, 0.20 mmol), 18-crown-6 (53 mg, 0.20 mmol) and a Teflon-coated magnetic stirring bar are added to a 1-dram vial. Then, anhydrous THF (0.40 mL) is added. The mixture is stirred for 5 min. at ambient temperature before allyl carbonate derivative (0.20 mmol) and the silyl enolate derivative (0.40 mmol, 2.0 equiv) are added. The vial is sealed with a cap and stirred at 50 °C for 12 h. Then, water (1 mL) is added to the reaction mixture followed by 1 N HCl (0.5 mL). The resulting mixture is stirred vigorously for 3 h at room temperature. Brine (1 mL) and Et2O (1 mL) are added; the organic layer is separated, and the aqueous layer is extracted with Et2O (3 x 3 mL). The combined organic extracts are dried over anhydrous magnesium sulfate, filtered, and concentrated under reduced pressure. Purification of the crude product is performed by flash column chromatography (gradient elution: hexane:Et2O = 50:1 to 5:1) to provide the product.
References
- Iridium-Catalyzed Enantioselective Allylic Substitution of Unstabilized Enolates Derived from α,β-Unsaturated Ketones
Application
C-H Borylation of Arenes
Typical Procedure:
A 25 mL-flask assembled a magnetic stirring bar, a septum inlet, and a condenser is charged with chloro(1,5-cyclooctadiene)iridium(I) dimer (10.1 mg, 0.015 mmol), 2,2’-bipyridyl (4.7 mg, 0.03 mmol), and bis-(pinacolato)diboron (254.0 mg, 1.0 mmol) and then flushed with nitrogen. An arene (60 mmol) is added, and the mixture is stirred at 80 °C for 16 h. The reaction mixture is analyzed by GC and GC mass spectroscopy. The product is extracted with benzene, washed with brine, and dried over MgSO4. Kugelrohr distillation gives analytically pure samples.
A 25 mL-flask assembled a magnetic stirring bar, a septum inlet, and a condenser is charged with chloro(1,5-cyclooctadiene)iridium(I) dimer (10.1 mg, 0.015 mmol), 2,2’-bipyridyl (4.7 mg, 0.03 mmol), and bis-(pinacolato)diboron (254.0 mg, 1.0 mmol) and then flushed with nitrogen. An arene (60 mmol) is added, and the mixture is stirred at 80 °C for 16 h. The reaction mixture is analyzed by GC and GC mass spectroscopy. The product is extracted with benzene, washed with brine, and dried over MgSO4. Kugelrohr distillation gives analytically pure samples.
References
- Mild iridium-catalyzed borylation of arenes. High turnover numbers, room temperature reactions, and isolation of a potential intermediate
Application
Iridium-catalyzed reaction of alcohols with enones affording 1,3-diketones
Typical procedure (R=H):
A mixture of [IrCl(cod)]2 (34 mg, 0.05 mmol), P(n-Oct)3 (74 mg, 0.2 mmol), i-PrOH (180 mg, 3 mmol), Na2SO3 (50 mg, 0.4 mmol), benzyl alcohol (108 mg, 1 mmol) and 2-cyclohexen-1-one (481 mg, 5 mmol) in p-xylene (1 mL) is stirred at 120 °C for 15 h under an argon atmosphere in a pressure tube. The product is purified by column chromatography on 230-400 mesh silica gel (eluent: hexane/ethyl acetate = 40/1) to give the desired 1,3-diketone (142 mg, 70% yield).
A mixture of [IrCl(cod)]2 (34 mg, 0.05 mmol), P(n-Oct)3 (74 mg, 0.2 mmol), i-PrOH (180 mg, 3 mmol), Na2SO3 (50 mg, 0.4 mmol), benzyl alcohol (108 mg, 1 mmol) and 2-cyclohexen-1-one (481 mg, 5 mmol) in p-xylene (1 mL) is stirred at 120 °C for 15 h under an argon atmosphere in a pressure tube. The product is purified by column chromatography on 230-400 mesh silica gel (eluent: hexane/ethyl acetate = 40/1) to give the desired 1,3-diketone (142 mg, 70% yield).
References
Application
Iridium-catalyzed alpha-alkylation of tert-butyl acetate
Typical procedure:
A mixture of [IrCl(cod)]2 (34 mg), PPh3 (39 mg), tert-BuOK (224 mg), n-butanol (74 mg) and tert-butyl acetate (449 mg) in tert-BuOH (1 mL) is stirred at 100 °C for 15 h under Ar. The product (tert-butyl hexanoate) is obtained in 74% yield (estimated using GC), and is isolated by column chromatography on 230-400 mesh silica-gel (eluent: hexane/THF = 50/1) in 62 % yield (107 mg).
A mixture of [IrCl(cod)]2 (34 mg), PPh3 (39 mg), tert-BuOK (224 mg), n-butanol (74 mg) and tert-butyl acetate (449 mg) in tert-BuOH (1 mL) is stirred at 100 °C for 15 h under Ar. The product (tert-butyl hexanoate) is obtained in 74% yield (estimated using GC), and is isolated by column chromatography on 230-400 mesh silica-gel (eluent: hexane/THF = 50/1) in 62 % yield (107 mg).
References
Application
Selective Synthesis of Diketones and omega-Hydroxy Ketones by [IrCl(cod)]2/PPh3/KOH System
Reference
PubMed Literature
Documents
Product Articles
[Research Articles] Iridium-catalyzed reaction of alcohols with enones affording 1,3-diketones
Product Documents (Note: Some products will not have analytical charts available.)
Enter TCI Product Number
Enter KISHIDA Product Number
4-5 alphanumeric characters before the hyphen
7 alphanumeric characters
Safety Data Sheet (SDS)
Please select Language.
The requested SDS is not available.
Please Contact Us for more information.
• The requested SDS is not available.
Specifications
The requested specifications are not available.
Please Contact Us for more information.
The requested specifications are not available.
C of A & Other Certificates
Please enter Lot Number
Incorrect Lot Number. Please input only the 4-5 alphanumeric characters before the hyphen.
Incorrect Lot Number. Please input only the 7 alphanumeric characters.
• Please check that the lot number you have entered is correct. It is 4-5 alphanumeric characters before the hyphen. In particular, please check O (letter) or 0 (number) and I (letter) or 1 (number).
• If your information is correct and you are still not able to view the requested certificates, Please Contact Us for more information.
• Please check that the lot number you have entered is correct. It is 7 alphanumeric characters. In particular, please check O (letter) or 0 (number) and I (letter) or 1 (number).
Sample C of A
This is a sample C of A and may not represent a recently manufactured lot of the product.
A sample C of A for this product is not available at this time.
Analytical Charts
Please enter Lot Number
Incorrect Lot Number. Please input only the 4-5 alphanumeric characters before the hyphen.
Incorrect Lot Number. Please input only the 7 alphanumeric characters.
The requested analytical chart is not available. Sorry for the inconvenience.