Published TCIMAIL newest issue No.196
Maximum quantity allowed is 999
Gelieve het aantal te selecteren
CAS RN: 1109-15-5 | Producten #: T2313
Tris(pentafluorophenyl)borane
×
![]()
×
Zuiverheid: >98.0%(NMR)
Synoniemen
documenten:
| Afmeting | Eenheidsprijs | België | Japan* | Hoeveelheid |
|---|---|---|---|---|
| 1G |
€94.00
|
20 | ≥100 |
|
| 5G |
€366.00
|
11 | ≥100 |
|
*Stock beschikbaar uit voorraad in België leverbaar in 1 tot 3 dagen
*stock beschikbaar uit voorraad in Japan leverbaar in 1 tot 2 weken (met uitzondering van gereguleerde producten en zendingen met droog ijs)
| Artikel # | T2313 |
| Zuiverheid / Analysemethode | >98.0%(NMR) |
| Moleculaire formule / molecuulgewicht | C__1__8BF__1__5 = 511.98 |
| Fysieke toestand (20 graden C) | Solid |
| Opslag condities | Frozen (<0°C) |
| Opslaan onder inert gas | Store under inert gas |
| Te vermijden condities | Hygroscopic,Heat Sensitive |
| CAS RN | 1109-15-5 |
| Reaxys registratienummer | 2931347 |
| PubChem product ID | 87558752 |
| Merck-index (14) | 9755 |
| MDL-nummer | MFCD00269813 |
Specificatie
| Appearance | White to Gray to Brown powder to crystal |
| Purity(NMR) | min. 98.0 atom% |
| Water | max. 1.0 % |
eigenschappen
| Smeltpunt | 128 °C |
| Maximale golflengte | 306(Toluene) nm |
| Oplosbaarheid (oplosbaar in) | Toluene |
GHS
| Pictogram |
|
| Signaalwoord | Waarschuwing |
| Gevarenaanduidingen | H315 : Veroorzaakt huidirritatie. H319 : Veroorzaakt ernstige oogirritatie. |
| Voorzorgsmaatregelen | P264 : Na het werken met dit product de huid grondig wassen. P280 : Beschermende handschoenen/ oogbescherming/ gelaatsbescherming dragen. P302 + P352 : BIJ CONTACT MET DE HUID: met veel water wassen. P337 + P313 : Bij aanhoudende oogirritatie: een arts raadplegen. P362 + P364 : Verontreinigde kleding uittrekken en wassen alvorens deze opnieuw te gebruiken. P332 + P313 : Bij huidirritatie: een arts raadplegen. |
Gerelateerde wetten:
Transport informatie:
| HS-NR (invoer / uitvoer) (TCI-E) | 2931900090 |
Toepassing
Deuteration of Aromatic and Heteroamomatic Compounds Catalyzed by Tris(pentafluorophenyl)borane
Experimental procedure: N,N-Dibenzylaniline (140 mg, 0.513 mmol), tris(pentafluorophenyl)borane (17.0 mg, 0.033 mmol), D2O (306 mg, 15.3 mmol) are placed in a sealed tube. The reaction mixture is stirred at 80 °C for 24 h. After the reaction is completed, the reaction mixture is purified by silica gel column chromatography (cyclohexane:ethylacetate = 20:1) to afford N,N-dibenzylaniline-2,4,6-d3 (134 mg) in 95% yield.
References
- B(C6F5)3‑Catalyzed Regioselective Deuteration of Electron-Rich Aromatic and Heteroaromatic Compounds
Toepassing
High Throughput Sequence-controlled Oligosiloxane Synthesis
References
- By-Product-Free Siloxane-Bond Formation and Programmed One-Pot Oligosiloxane Synthesis
Toepassing
Frustrated Lewis Pair (FLP)-induced Hydrogenations of Silyl Enol Ethers
References
- Heterolytic dihydrogen activation with the 1,8-bis(diphenylphosphino)naphthalene/B(C6F5)3 pair and its application for metal-free catalytic hydrogenation of silyl enol ether
Toepassing
Tri(cyclohexa-2,5-dien-1-yl)silane: A Stable and Easy-to-handle Surrogate of Monosilane (SiH4)
Synthesis of multisubstituted silanes:
In a glove box, a Schlenk tube is charged with an alkene (0.300 mmol). In two vials are weighed B(C6F5)3 (7.7 mg, 15 µmol) and tri(cyclohexa-2,5-dien-1-yl)silane (1, 28.0 mg, 0.105 mmol). All the sealed containers are taken out of the glove box, and the Schlenk tube is connected to a N2 line. Under a N2 counterflow are subsequently added 0.3 mL of CH2Cl2, 1 then B(C6F5)3. The tube is completely sealed and stirred at room temperature for 24 h. After this time, two drops of triethylamine are added to the solution under an N2 counterflow, and the resulting mixture is stirred for 5 min before being filtered over a short alumina column (elution with CH2Cl2). After evaporation of all volatiles, the crude product is purified by flash column chromatography to give the multisubstituted silane 3.
In a glove box, a Schlenk tube is charged with an alkene (0.300 mmol). In two vials are weighed B(C6F5)3 (7.7 mg, 15 µmol) and tri(cyclohexa-2,5-dien-1-yl)silane (1, 28.0 mg, 0.105 mmol). All the sealed containers are taken out of the glove box, and the Schlenk tube is connected to a N2 line. Under a N2 counterflow are subsequently added 0.3 mL of CH2Cl2, 1 then B(C6F5)3. The tube is completely sealed and stirred at room temperature for 24 h. After this time, two drops of triethylamine are added to the solution under an N2 counterflow, and the resulting mixture is stirred for 5 min before being filtered over a short alumina column (elution with CH2Cl2). After evaporation of all volatiles, the crude product is purified by flash column chromatography to give the multisubstituted silane 3.
References
- Formal SiH4 chemistry using stable and easy-to-handle surrogates
Toepassing
Metal-Free Hydrogenation of Ketone by Frustrated Lewis Pairs (FLPs)
Typical procedure (R, R’ = n-Pr): 4-Heptanone (1.00 g, 8.76 mmol) is weighed into a 125 mL reactor. Subsequently, B(C6F5)3 (0.224 g, 0.43 mmol) dissolved in Et2O (14.3 mg, 20 mL, 0.19 mol) is added to the reactor. The reactor is sealed and attached to a hydrogen gas line. The flask is purged ten times at 15 atm with hydrogen gas. The reactor is then pressurized with 60 atm hydrogen gas and placed in an oil bath for 12 h at 70 °C. The reactor is slowly vented and all the volatiles are collected by vacuum distillation while cooling the collected distillate with liquid nitrogen. The solvent is removed by applying a gentle stream of N2 gas to give 4-heptanol (886 mg, 87% yield, and 99 % conversion determined by 1H NMR).
References
- T. Mahdi, D. W. Stephan, J. Am. Chem. Soc. 2014, 136, 15809.
- Highlighted in Chem. Eng. News 2014, 92 (44), 8.
Toepassing
Metal-Free Hydrogenation of N-Phenyl Aromatic Rings
Typical procedure (Entry 1): A 25 mL glass bomb equipped with Teflon screw cap is charged with a solution of B(C6F5)3 (37.9 mg, 1 eq.) and N-isopropylaniline (10.0 mg, 0.074 mmol) in toluene (1 mL). The reaction tube is degassed three times through a freeze-pump-thaw cycle on the vacuum/H2 line and filled with H2 (4 atm) at -196 °C. The reaction bomb is placed in a 110 °C oil bath for 36 h. The toluene is removed under reduced vacuum to yield a white precipitate. The product is washed with pentane (2 x 2 mL) and dried under reduced pressure to give [iPrNH2Cy][HB(C6F5)3] (93 %).
References
- 1)T. Mahdi, Z. M. Heiden, S. Grimme, D. W. Stephan, J. Am. Chem. Soc. 2012, 134, 4088.
- 2)D. W. Stephan, G. Erker, Angew. Chem., Int. Ed. 2010, 49, 46.
Toepassing
Metal-free Hydrogenation of Imines Catalyzed by B(C6F5)3
Typical Procedure: In a glovebox, B(C6F5)3 (18.2 mg, 0.0355 mmol, 20 mol%) is dissolved in dry diisopropylamine (2.5 mL, 1.8 g, 17 mmol) and the solution is added to N-benzylidene-tert-butylamine (28.7 mg, 0.177 mmol, 1 eq.). The resulting solution is transferred to a 25 mL bomb with a sealable Teflon tape and magnetic stirbar. The reaction vessel is sealed, removed from the glovebox and stirred at 100°C for 24 h after which it is cooled to room temperature. The reaction mixture is quenched by the addition of silica followed by elution through a short silica column. The filtrate is concentrated in vacuo to give the desired product.
References
PubMed Literatuur
Artikelen / Brochures
TCIMail
[Product Highlights] Deuteration of Aromatic and Heteroamomatic Compounds Catalyzed by Tris(pentafluorophenyl)borane[Product Highlights] A Bisphosphine Usable for Metal-free Hydrogenations
[Research Articles] High Throughput Sequence-controlled Oligosiloxane Synthesis
[Research Articles] Tri(cyclohexa-2,5-dien-1-yl)silane: A Stable and Easy-to-handle Surrogate of Monosilane (SiH4)
[Research Articles] Metal-Free Hydrogenation of Ketone by Frustrated Lewis Pairs (FLPs)
[Research Articles] Metal-Free Hydrogenation of N-Phenyl Aromatic Rings
[Research Articles] Metal-Free Hydrogenation of Imines Catalyzed by B(C6F5)3
Documenten (Opmerking: Voor sommige producten zijn geen analytische grafieken beschikbaar.)
Veiligheidsinformatie-blad (VIB)
Selecteer alstublieft taal.
Het gevraagde SDS is niet beschikbaar.
Neem contact met ons op voor meer informatie.
Specificatiedocument
Analyse certificaat & andere certificaten
Gelieve het lotnummer in te vullen aub
Er is een onjuist lotummer ingevoerd. Voer alleen 4-5 alfanumerieke tekens vóór het koppelteken in.
Voorbeeldanalysecertificaat
Dit is een voorbeeldanalysecertificaat en vertegenwoordigt mogelijk niet een recent geproduceerde partij van het product.
Een voorbeeldanalysecertificaat voor dit product is op dit moment niet beschikbaar.
Analytische grafieken
Gelieve het lotnummer in te vullen aub
Er is een onjuist lotummer ingevoerd. Voer alleen 4-5 alfanumerieke tekens vóór het koppelteken in.
De gevraagde analytische grafiek is niet beschikbaar. Onze excuses voor het ongemak.