text.skipToContent text.skipToNavigation

Maximum quantity allowed is 999

请选择数量

CAS RN: 657408-07-6 | 产品编码: D5036

2-Dicyclohexylphosphino-2',6'-dimethoxybiphenyl

Chemical Structure of 2-Dicyclohexylphosphino-2',6'-dimethoxybiphenyl

纯度/分析方法: >98.0%(HPLC)
别名:
  • 2-双环己基膦-2',6'-二甲氧基联苯
  • 二环己基(2',6'-二甲氧基-[1,1'-联苯基]-2-基)膦
  • Dicyclohexyl(2',6'-dimethoxy-[1,1'-biphenyl]-2-yl)phosphine
  • SPhos
产品文档:
1G
¥715.00
1   1   ≥80 
5G
¥1,550.00
1   2   ≥80 
* 点击“查询”可查看预计发货日期,仅供参考。
* 无具体发货日期的情况,如:显示“8个工作日后发货”,将在您订购日起的8个工作日后发货。
* 我们将以最优方式从上海/天津两大仓库发货。国内库存不足,需两周左右向日本总部调货。
* 对于可分装产品,11:30前的订单,当天发货;11:30后的订单,隔天发货。
* 如需大包装,请点击“大包装询价”按钮(对于某些产品我们无法提供大包装)。
* TCI会经常复审储藏条件以对其进行优化,请以在线目录为准,敬请留意。
* 更多信息,请联系营业部:021-67121386 / Sales-CN@TCIchemicals.com 。任何货期、规格或包装方面的需求,请联系我们

补充产品信息:

This product is intended for research and development purposes only. It may not be used for (i) any human or veterinary use, including without limitation therapeutic and prophylactic use, (ii) any clinical use, including without limitation diagnostic use. Any use of this product for any of the above mentioned purposes requires a license from the Massachusetts Institute of Technology.

List of Patent Applications and Patents (PDF)

产品编码 D5036
纯度/分析方法 >98.0%(HPLC)
分子式/分子量 C__2__6H__3__5O__2P = 410.54 
外观与形状(20°C) 固体
储存温度 室温 (15°C以下阴凉干燥处)
储存在惰性气体下 存放于惰性气体之中
应避免的情况 空气
包装和容器 1G-带有塑料内管的玻璃瓶 (查看图片)
CAS RN 657408-07-6
Reaxys-RN 10118080
PubChem物质ID 354334573
MDL编号

MFCD05861611

技术规格
Appearance White to Almost white powder to crystal
Purity(HPLC) min. 98.0 area%
Melting point 163.0 to 167.0 °C
物性(参考值)
熔点 165 °C
溶解性(可溶于) 氯仿
GHS
象形图 Pictogram
信号词 警告
危险性说明 H315 : 造成皮肤刺激。
H319 : 造成严重眼刺激。
防范说明 P264 : 作业后彻底清洗皮肤。
P280 : 戴防护手套/戴防护眼罩/戴防护面具。
P302 + P352 : 如皮肤沾染:用水充分清洗。
P337 + P313 : 如仍觉眼刺激:求医/就诊。
P305 + P351 + P338 : 如进入眼睛:用水小心冲洗几分钟。如戴隐形眼镜并可方便地取出,取出隐形眼镜。继续冲洗。
P362+P364 : 脱掉沾污的衣服,清洗后方可重新使用。
P332 + P313 : 如发生皮肤刺激:求医/就诊。
相关法规
新化学物质备案回执号 B1A232215479
运输信息
监管条件代码(*)
应用
TCI Practical Example: Suzuki-Miyaura cross-coupling Using a Palladium Catalyst and SPhos

Used Chemicals

Procedure

To a 3-necked flask was charged with bis(dibenzylideneacetone)palladium (0) (66 mg, 0.115 mmol, 1.5 mol%), SPhos (94 mg, 0.229 mmol, 3.0 mol%), 2-methylphenylboronic acid (1.56 g, 11.5 mmol, 1.5 equiv.), tripotassium phosphate (4.87 g, 22.9 mmol, 3.0 equiv.) degassed toluene (15 mL), and ion-exchange water (1.5 mL) under nitrogen atmosphere. The mixture was stirred at room temperature for 5 min. 2-Chloro-m-xylene (1.0 mL, 7.64 mmol, 1.0 equiv.) was added one portion. The resulting mixture was stirred at reflux for 7 h. The reaction mixture was cooled to room temperature and quenched with water (10 mL). The organic layer was washed with water (10 mL), and brine (10 mL), dried with Na2SO4 (20 g) and then concentrated under reduced pressure. The crude product was purified by column chromatography on silica gel (hexane only) to afford the corresponding compound as a colorless oil (1.46 g, 97%).

Experimenter's Comments

i) Toluene was degassed by bubbling with nitrogen gas for 30 min.
ii) The reaction mixture was monitored by GC.

Analytical Data(2,2',6-Trimethyl-1,1'-biphenyl)

1H NMR (400 MHz, CDCl3); δ 7.23-7.33 (m, 3H), 7.22-7.10 (m, 3H), 7.00-7.06 (m, 1H), 1.99 (s, 3H), 1.97 (s, 6H).

13C NMR (101 MHz, CDCl3); δ 141.0, 140.5, 135.8, 135.5, 129.9, 128.8, 127.2 127.0, 126.9, 126.0, 20.3, 19.4.

Lead Reference


应用
TCI Practical Example: Suzuki-Miyaura coupling

Used Chemicals

Procedure

4'-Chloroacetophenone (200 mg, 1.29 mmol) and 1-Boc-1,2,3,6-tetrahydropyridine-4-boronic acid pinacol ester (440 mg, 1.42 mmol) were dissolved in degassed mixture of toluene (5.0 mL), EtOH (2.0 mL) and water (2.0 mL). To this solution was added K3PO4 (820 mg, 3.88 mmol), SPhos (21 mg, 0.052 mmol, 4 mol%) and Pd2(dba)3 (18 mg, 0.020 mmol, 1.5 mol%). The reaction mixture was refluxed for 21 h, allowed to cool to room temperature and quenched with H2O (5 mL). The organic phase was separated and washed with H2O (5 mL) and brine (5 mL), dried over Na2SO4 (10 g), concentrated under reduced pressure to afford the crude product as orange oil. It was purified by column chromatography on silica-gel (hexane 100% ~ hexane: EtOAc = 70: 30) to afford the product 1 as colorless crystalline solid (310 mg, 1.03 mmol, 80%).

Experimenter's Comments

Toluene was degassed by refluxing under nitrogen atmosphere.

Analytical Data(N-Phenylethyl-3-phenylpropaneamide)

1H NMR (400 MHz, benzene-d6); δ 7.90 (d, J = 8.7 Hz, 2H), 7.42 (d, J = 8.7 Hz, 2H), 6.15 (brs, 1H), 4.08 (m, 2H), 3.63 (m, 2H), 2.50 (s, 3H), 2.52 (m, 2H), 1.47 (s, 9H).


PubMed Literature


产品文档 (部分产品的分析图谱无法提供,敬请谅解。)
化学品安全说明书(SDS)
请选择语言。

如需更多帮助,请联系我 们。

技术规格
CoA及其他文档
请输入批号 批号输入有误。请输入中横线前的4-5个字母数字字符。

您查询的批号已售罄,相关文档不再提供。请尝试该产品的其他批号。

示例 CoA
可下载CoA示例。注:该示例不一定是最新批次的CoA。

目前没有该产品的 CoA 示例。

分析图谱
请输入批号 批号输入有误。请输入中横线前的4-5个字母数字字符。

很抱歉,您搜索的分析图谱无法提供。

您查询的批号已售罄,相关文档不再提供。请尝试该产品的其他批号。

其他文件

会话状态
当前会话将在10分钟后超时,并返回主页。请点击按钮继续浏览。分钟后超时,并返回主页。请点击按钮继续浏览。

您的会话已超时,将返回至主页。

切换区域将退出您当前的登录状态。是否继续?