CAS RN: 429-41-4 | Product Number: T1338
Tetrabutylammonium Fluoride (ca. 1mol/L in Tetrahydrofuran)
* For order or inquiry, please contact
Our Authorized Distributors.
*TCI frequently reviews storage conditions to optimize them. Please note that the latest information on the storage temperature for the products is described on our website.
* To send your quote request for bulk quantities, please click on the "Request Bulk Quote" button. Please note that we cannot offer bulk quantities for some products.
|Molecular Formula / Molecular Weight||C__1__6H__3__6FN = 261.47|
|Physical State (20 deg.C)||Liquid|
|Store Under Inert Gas||Store under inert gas|
|Condition to Avoid||Air Sensitive|
|Reaxys Registry Number||3570522|
|PubChem Substance ID||87577107|
|Merck Index (14)||9187|
|Appearance||Colorless to Red to Green clear liquid|
|Concentration(Nonaqueous Titration)||1.0 to 1.1 mol/L|
|Water||max. 10.0 %|
|TBHF-HF(neutralization titration)||max. 5.0 %|
|Flash point||-17 °C|
|Specific Gravity (20/20)||0.92|
|Solubility in water||Completely miscible|
|Hazard Statements||H302 : Harmful if swallowed.
H314 : Causes severe skin burns and eye damage.
H371 : May cause damage to organs.
H372 : Causes damage to organs through prolonged or repeated exposure.
H335 : May cause respiratory irritation.
H225 : Highly flammable liquid and vapor.
|Precautionary Statements||P501 : Dispose of contents/ container to an approved waste disposal plant.
P260 : Do not breathe dust/ fume/ gas/ mist/ vapors/ spray.
P270 : Do not eat, drink or smoke when using this product.
P240 : Ground/bond container and receiving equipment.
P210 : Keep away from heat/sparks/open flames/hot surfaces. No smoking.
P233 : Keep container tightly closed.
P243 : Take precautionary measures against static discharge.
P241 : Use explosion-proof electrical/ ventilating/ lighting/ equipment.
P242 : Use only non-sparking tools.
P271 : Use only outdoors or in a well-ventilated area.
P264 : Wash skin thoroughly after handling.
P280 : Wear protective gloves/ protective clothing/ eye protection/ face protection.
P370 + P378 : In case of fire: Use dry sand, dry chemical or alcohol-resistant foam to extinguish.
P308 + P311 : IF exposed or concerned: Call a POISON CENTER/doctor.
P303 + P361 + P353 : IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P301 + P330 + P331 : IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P363 : Wash contaminated clothing before reuse.
P301 + P312 + P330 : IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Rinse mouth.
P304 + P340 + P310 : IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor.
P305 + P351 + P338 + P310 : IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor.
P403 + P233 : Store in a well-ventilated place. Keep container tightly closed.
P403 + P235 : Store in a well-ventilated place. Keep cool.
P405 : Store locked up.
|Class||3 / 8|
|Customs Control Conditions (Q)|
A New and Efficient Hypervalent Iodine-Benzyne Precursor, (Phenyl)[o-(trimethylsilyl)phenyl]iodonium Triflate: Generation, Trapping Reaction, and Nature of Benzyne
Under an argon atmosphere, TBAF (1.0 M in THF, 1.5 mL, 1.5 mmol) is added into a suspension of flame-dried MS4Å (1.0 g) in THF (4.0 mL) and the mixture is stirred at room temperature for 2.0 h. Then the mixture is cooled at －20 °C and a solution of ethyl 4,4-difluoro-3-(triethylsilyl)but-3-enoate (265 mg, 1.0 mmol) and benzaldehyde (204 µL, 2.0 mmol) is added to the mixture over 1.0 h at －20 °C. After stirring the mixture for
1 h at the same temperature, the whole is poured into aqueous 10% HCl, extracted with Et2O and the organic layer is dried with anhydrous MgSO4. After evaporation of the solvent, the residue is purified by column chromatography (SiO2, EtOAc : hexane) to give the desired product.
Safety Data Sheet (SDS) Search
The requested SDS is not available.
Please check that the Product Number you have entered is correct.
If your information is correct and you are still not able to view the requested SDS, please Contact Us for more information.