Live/Dead Cell Staining Kit [for Cell Staining]

×

純度（試験方法）:

別名:

• 生/死細胞染色キット [細胞染色用]

製品書類：

SDS | 規格表 | 試験成績書・各種証明書 | 分析チャート

基本情報 | 規格値・物性値 | 法規情報 | 利用例・文献

製品補足情報

このページの凡例

包装単位	価格	埼玉県(川口)倉庫	兵庫県(尼崎)倉庫	その他の倉庫	出荷情報
1KIT	¥32,000	3	6	お問い合わせ	出荷シミュレーション

大量製造見積依頼フォーム

・埼玉県倉庫、兵庫県倉庫の在庫は即日、その他の倉庫の在庫は2～3営業日程度で埼玉県倉庫より出荷となります。 埼玉県倉庫、兵庫県倉庫からの配送対象エリア は各々異なります。表示されている納期は現時点のもので、変更となる可能性もありますので予めご了承ください。納期に関するご質問は営業部までお問い合わせください。 ［本社営業部］Tel: 03-3668-0489　［大阪営業部］Tel: 06-6228-1155
・表示している価格は本体価格で、消費税等は含まれていません。表示している本体価格は最新のものとなり、価格は予告なく変更する場合があります。
・最大包装単位の20倍以上の量をご入用の場合は、「大量製造見積依頼」ボタンをクリックし専用フォームでお問い合わせください。一部の製品についてはご希望に添えない場合もありますので、予めご了承ください。
・弊社では常に保管条件を最適化するための見直しを行っています。最新の製品保管条件はホームページ上に記載されたものとなりますので、ご了承ください。

Product Information

• Components : Calcein-AM Solution (Ex/Em = 490 nm/515 nm), PI Solution (Ex/Em = 530 nm/620 nm)
• Size : Calcein-AM Solution (1 mM) in DMSO50 µL×4 vials, PI Solution (1.5 mM) in Water600 µL×1 vial

Description

• This product is a combination of Calcein-AM, a fluorescent dye for staining live cells, and PI (Propidium Iodide), a fluorescent dye for staining dead cells, allowing simultaneous staining of live and dead cells. It can be used to observe cells under a fluorescence microscope.

Direction for Use

[Staining Solution Preparation]

• 1. Bring Calcein-AM solution and PI solution to room temperature.
  2. Add 1 μL Calcein-AM solution and 3 μL PI solution to 1mL PBS. This is the staining solution. At this time, the concentrations of Calcein-AM and PI are 1 μM and 4.5 μM, respectively.
• Note: Staining conditions will vary depending on observation conditions such as cell type and concentration. Optimal conditions such as reagent concentration should be considered.
  Calcein-AM can be hydrolyzed by moisture, so replace the cap tightly after use and be careful not to absorb moisture.
  Prepared staining solutions should be used on the same day.
  PI is a suspected carcinogen and should be handled with caution.

[Determination of Optimal Staining Concentration]

• Kill cells by treating with 0.1% saponin or 0.1-0.5% digitonin for 10 minutes or 70% methanol for 30 minutes.
  Stain dead cells with 0.1-10 μM PI solution to find a concentration that stains only the nuclei red without staining the cytoplasm.
  Stain dead cells with 0.1-10 μM Calcein-AM solution to find a concentration that does not stain the cytoplasm. Then confirm that live cells stain at this concentration. If staining is inadequate, increase the concentration.

[Cell Staining]

• 1. For adherent cells, digest cells with cell scraper or trypsin-EDTA and collect by centrifugation (1000 rpm, 3 minutes). For suspended cells, collect cells by direct centrifugation (1000 rpm, 3 minutes).
  2. Centrifuge the cell suspension, remove the supernatant and add PBS. Thoroughly disperse the cells by pipetting or other means. Repeat washing with PBS and centrifugation 2-3 times. Cells should be washed prior to testing, as esterases present in serum containing medium may hydrolyze Calcein-AM resulting in increased background.
  3. After centrifugation, remove the supernatant and add the staining solution (adjust cell count to approximately 0.5 x10⁵ - 10 x10⁵ cells/mL).
  4. Incubate at 37 °C for 15 minutes.
  5. Place the stained cell solution on a slide, gently cover with a coverslip, and examine under a microscope.

Storage